查詢結果分析
來源資料
相關文獻
- 利用灰關聯分析與田口法對模具鋼放電加工最佳化參數之探討
- 放電加工製程參數最適化之研究
- SUS304不銹鋼放電加工特性之田口法分析
- 結合L18直交表與灰關聯分析運用於雕模放電加工製程參數最適化之研究
- 應用灰色系統於放電加工參數之最佳選擇
- 田口法應用於車削SKD61模具鋼之最適條件分析
- 磁力輔助放電加工多重加工品質特性之製程參數最佳化分析
- Optimizing the EDM Process with Multi-Response Characteristics by Using the Grey-Based and Fuzzy-Based Taguchi Method
- 以田口方法探討放電加工鍍層於表面改質之研究
- 高速銑削於模具鋼曲面加工表面精度之探討
頁籤選單縮合
題名 | 利用灰關聯分析與田口法對模具鋼放電加工最佳化參數之探討=Investigating the Optimum Parameters in EDM Using Taguchi Method and Grey Relational Analysis |
---|---|
作者 | 黃再得; 黃信賢; 簡文通; Huang, T. T.; Huang, H. H.; Chien, W. T.; |
期刊 | 永達學報 |
出版日期 | 20060600 |
卷期 | 7:1 民95.06 |
頁次 | 頁32-40 |
分類號 | 446.8924 |
語文 | chi |
關鍵詞 | 放電加工; 灰關聯分析; 田口法; 模具鋼; Electrical discharge machining; Grey relational analysis; Taguchi method; Mold steel; |
中文摘要 | 本研究結合灰關聯分析與田口法探討SKD11模具鋼於放電加工時之最佳化參數組合,以及各加工參數對加工結果之影響。實驗結果顯示工作波寬對表面粗糙度、材料移除率及擴孔量有最為顯著的影響,而高壓電流則有次要顯著的影響。針對多重加工特性問題,應用灰關聯分析理論,以放電加工中表面粗糙度為望目品質特性、材料移除率望大品質特性及擴孔量小品質特性時,可從所設計的加工參數組合中得到一組最佳化的組合,同時滿足上述三項品質特性之最佳目標值。本研究的過程及結果可提供相關產業的參考。 |
英文摘要 | This study combines grey relational analysis and Taguchi method to find a set of optimal parameter in electrical discharge machining SKD11 steel mold and to analyze the effect of the individual parameters on the EDM results. It has been shown that time interval is the most significant effect on surface roughness, material removal rate and hole-enlargement. The high voltage current is the second significant effect. Furthermore, grey relational analysis has been applied in the multiple characteristic problem for the three quality characteristic, nominal-the-better quality characteristic is adopted for the surface roughness, larger-the-better quality characteristic for the material removal rate, and smaller-the-better quality characteristic for the hole-enlargement using the similar method. It can be attained an optimal machining parameter combination from the designed machining sets. The processes and results in this study can be applied to the reclated industries for reference. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。