查詢結果分析
相關文獻
- Electric Current Effects in Flip Chip Solder Joints
- 電流效應對無鉛銲點之影響
- Current-Mode Sinusoidal Oscillators Using Two FTFNs
- 山上P/S 161KV雙BUS改為兩單BUS工程之規劃施工
- 以不銹鋼電極處理高濃度氰化物之最佳操作條件探討
- 鹼浴添加有機酸鹽和使用直流電與脈衝電流對鋁材陽極氧化之研究
- 空間向量調變法之三相高功因轉換器
- 電流變材料的應用
- 輸入緩衝電路的設計
- An Integrated Current Controller for Advanced Static Reactive Power Sources
頁籤選單縮合
題 名 | Electric Current Effects in Flip Chip Solder Joints=覆晶銲點中之電流效應 |
---|---|
作 者 | 王朝弘; 陳信文; | 書刊名 | Journal of the Chinese Institute of Chemical Engineers |
卷 期 | 37:2 民95.03 |
頁 次 | 頁185-191 |
分類號 | 448.533 |
關鍵詞 | 銲點; 電流; 覆晶技術; Flip chip; Electromigration; Current crowding; Current density; |
語 文 | 英文(English) |
中文摘要 | 覆晶技術已成為電子構裝中之主要接合技術之一。隨著電子產品之微小化,銲料凸塊的尺寸越來越小,而銲料凸塊的電流密度之隨之增大。不同的材料在銲點相互接擉,因此在界面處會存在著組成之濃度梯度。當電流通過銲點時,會伴隨產生焦耳熱效應和電遷移效應。焦耳熱效應造成銲點溫度提高。另一方面,擴散和電遷移效應,則造成銲點中原子移動。本研究探討微結構對電流分佈的影響,包括不同形狀的孔洞及銲料中存在之多相結構,並將計算結果和實驗上所觀察的現象做比較。本研究亦討論在覆晶銲點中之電流聚集效應及其溫度分佈。結果發現在覆晶接點中,障層的消耗速率和電流聚集的位置有密切關。在本研究亦發現,覆晶接點的幾何形狀和孔洞對於電流聚集有很大的影響,其效應遠勝於銲料中的多相結構。 |
英文摘要 | Flip chip technology has become one of the major joining technologies in electronic packaging. With the trend toward miniaturization, solder bumps are getting smaller, and the electric current loading of each solder bump is getting higher. At solder joints, different materials are brought into contact, and there are compositional gradients at the interfaces. As an electric current passes though, the Joule heating and electromigration effects occur in the flip chip solder bumps. The joints heat up as a result of the Joule heating effect. Atoms in the solder joints move as a result of both diffusion and electromigration. In this styled, current distributions in various microstructures with different shapes of voids and multi-phases of solder were calculated, and the calculated results were compared with experimental observations. The current crowing effect and temperature distributions if flip chip solders are discussed. It is found that the highest consumption rates of barrier layers in certain parts of flip-chip joints are related to the current crowding phenomena. It is also found that the geometry of a flip-chip joint and void formation have stronger effects upon current crowding than the multi-phase nature of solder bumps does. |
本系統中英文摘要資訊取自各篇刊載內容。