查詢結果分析
來源資料
頁籤選單縮合
題名 | 鑽石磨輪對成形砂輪之修整研究=Studies on Dressing of Profile Grinding Wheels with Diamond Form Rollers |
---|---|
作者姓名(中文) | 陳德楨; 楊宏智; | 書刊名 | 國立臺灣大學工程學刊 |
卷期 | 92 民93.10 |
頁次 | 頁71-78 |
分類號 | 446.8955 |
關鍵詞 | 修整; 砂輪; 磨耗; 鑽石磨輪; Dressing; Grinding wheel; Wear; Diamond form roller; |
語文 | 中文(Chinese) |
中文摘要 | 本研究針對成形砂輪開發出一套具有磨耗補正功能的線上修整系統,以非接觸式光學影像量測技術,經過修整前後分別取像,分析砂輪邊緣位置變化,來求得砂輪的磨耗量。在修整砂輪時,相較於輪廓鑽石、鑽石頭等刀具,本研究採用低修整力、較省時、較彈性、耐磨耗的鑽石磨輪來進行輪廓修整。本系統並同時檢測出鑽石磨輪刀鼻半徑的磨耗值以直接對修整路徑進行補正,使砂輪的修整精度可達0.01 mm。此外,為驗證其可行性與精確性而對兩種不同粒度的砂輪在不同的修整條件下進行線上修整測試,目前得到之成果印證十分良好,並具高度實用性。 |
英文摘要 | In this thesis, we present a on-line dressing system of profile grinding wheels with wear compensation. We use an non-contact method of measuring the wear of wheels by capture the images before and after the grinding process, analyze the position deviation of the grinding wheel’s edge, then evaluate the grinding wheel wear. In comparison to diamond profile rollers and point diamonds, we use diamond form rollers as our dressing tools for the benefit of low dressing force, short dressing time, more flexibility and extremely wear resistant. The wear of diamond form rollers was also be compensated into the toolpath at the same time and the accuracy is about 0.01 mm. In this study, a series of dressing tests with different setting conditions was carried out to improve the reliability and accuracy ---the results are found as good as expected. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。