查詢結果分析
來源資料
相關文獻
- 以田口實驗法於木質材料受熱輻射引燃之研究
- The Optimal Hydrodynamic Design of a Three-Phase Draft-Tube Fluidized Bed with an Orthogonal Array
- 實驗計劃法製備難燃性PU泡綿之研究
- 劈裂式鑽頭鑽削複合材料之力學模式研究
- 田口法應用於最佳化設計問題
- 應用田口式參數設計降低批量再訂購點模式之存貨成本
- 應用灰色GM(1,N)模型及田口實驗法於塑膠射出成型加工上之研究
- 品質工程之田口式實驗設計
- 軍艦IR抑制及反制發展
- Radiation Effect on Free Convection about a Truncated Cone Embedded in a Saturated Porous Medium
頁籤選單縮合
題名 | 以田口實驗法於木質材料受熱輻射引燃之研究=Investigation of Taguchi Method for Ignitability of Wood-Based Material by Thermal Radiation |
---|---|
作者 | 鄭紹材; 劉益宏; | 書刊名 | 中華建築學刊 |
卷期 | 1:1 民94.03 |
頁次 | 頁57-64 |
分類號 | 440.31 |
關鍵詞 | 田口實驗計畫法; 熱輻射; 直交表; 著火性; Taguchi method; Thermal radiation; Orthogonal array; Ignitability; |
語文 | 中文(Chinese) |
中文摘要 | 本研究以田口試驗計畫法針對木質裝修材料在不同影響著火性試驗變數下,如板材、板厚、阻燃塗料塗佈量和阻燃塗料配比,使用L9(34)之直交表進行實驗配置,並仿照ASTM E1623試驗規範進行熱輻射著火性試驗。試驗結果分析,影響木質材料受25kW/M2熱輻射其著火性因素之排序,最大者為阻燃塗料配比,貢獻度為48.72%。根據田口試驗結果之最佳因子水準組合,針對阻燃塗料塗佈量因子進行深入試驗研究,可得木質材料阻燃處理之最佳阻燃塗料塗佈量為391g/m2。以田口試驗法探討因素與水準數所建立之直交表,簡化多變數繁雜之試驗,較全因子實驗法試驗次數少且各試驗之再現性高。 |
英文摘要 | This research used Taguchi method to analyze the ignitability of wood-based material under different variables, such as the material, the thickness, ht degree of coating, and the formulation of coating. Taguchi method adopts the orthogonal array of L9(39) for experiments. The testing methodology adopts in this research simulated that specified in ASTM E1623. From experiment results, it was found that, under 25kW/m2 thermal radiation, the ranking most significant influence on the ignitability, is formulation of coating, which contributes 48.72% of heating retarding performance. By regression analysis of Taguchi method, it’s concluded that the optimal amount of coating for wood-based materials tested is 391g/m2. It is also found from this research that the Taguchi method provides a more efficient approach, compound with the traditional full-factor experiment method, in number of experiments required. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。