查詢結果分析
來源資料
相關文獻
- Vibration Analysis of Pre-Twisted Tapered Blades Using the Differential Quadrature Method
- Vibration Analysis of Rectangular Plates with Mixed Boundary Conditions
- Free Vibration Analysis of Non-uniform Beams
- 雙截面非均勻旋轉樑的自然振動頻率分析
- 振動學教具之製作
- 冷軋產品振動輥痕的成因分析及改善
- 小波理論應用結構振動訊號與阻尼比分析之研究
- 遠端振動監測與軸裂監測系統於核電廠再循環泵之應用
- 邊界骨質狀態對人工牙根自然頻率影響之有限元素分析
- 臺電核能電廠再循環泵及主冷卻水泵振動及軸裂即時監測
頁籤選單縮合
題 名 | Vibration Analysis of Pre-Twisted Tapered Blades Using the Differential Quadrature Method=微分值積法於非均勻斷面預扭渦輪葉片之振動分析 |
---|---|
作 者 | 徐明宏; | 書刊名 | 澎技學報 |
卷 期 | 8 2004.12[民93.12] |
頁 次 | 頁63-84 |
分類號 | 440.11 |
關鍵詞 | 自然頻率; 非均勻斷面預扭渦輪葉片; 微分值積法; Natural frequency; Pre-twisted tapered blade; DQM; |
語 文 | 英文(English) |
中文摘要 | 利用微分值積法配合漢米爾頓原理,推導具非均勻斷面預扭渦輪葉片的運動方程式,為驗證微分值積法用於分析此類非均勻斷面預扭渦輪葉片的適用性,就具均勻等向性材料之非均勻預扭葉片進行模式推導與參數分析。為分析微分值積法中選點對計算結果精度之影響,亦就均勻分佈取樣點與依Chebyshev-Gauss-Lobatto函數分佈取樣點所得結果進行比對,由數值結果顯示使用Chebyshev-Gauss-Lobatto函數分佈取樣點得到的結果比均勻分配的取樣點所得到的結果好。針對預扭角度對非均勻斷面預扭渦輪葉片動態行為的影響作探討,研究的結果與文獻的數值解及有限元素法結果做比較均甚吻合,由數值結果顯示出微分值積法用於分析非均勻斷面預扭渦輪葉片振動問題具有良好的精確度。 |
英文摘要 | The differential quadrature method (DQM) was used to formulate the eigen value problems of pre-twisted tapered blades. The DQM can rapidly compute the derivative of a function at any point within its boundary domain. Numerical results indicated that the accuracy of the calculated natural frequencies is significantly dependent upon the total twist angle of the tapered blade. Numerical results indicated that DQM-based modeling leads to high accuracy. |
本系統中英文摘要資訊取自各篇刊載內容。