查詢結果分析
相關文獻
- 低功率雷射二極體驅動電路之設計
- 低功率無線通信系統介接固定網路之研究
- 反應爐臨界時低功率物理測試與硼酸濃度關係研討
- 一個0.35微米CMOS內嵌雙埠SRAM記憶體編輯器
- A 10-Bit 50MHz Analog-to-Digital Converter Using Pipeline Architecture and Current-Mode Techniques
- 低耗電積體電路設計技術之探討
- Low Power Programming Design for a Microcomputer 8051 System Powered by Solar Cells
- A Method for Improving Performance and Reducing Power in Microprocessor
- 日本PHS在臺灣能成功嗎﹖--手機界的外來政權!PHS
- Object-Oriented High Level Architecture Optimization for Low-Power Embedded System
頁籤選單縮合
題 名 | 低功率雷射二極體驅動電路之設計=Low Power Laser Diode Driver Circuit Design |
---|---|
作 者 | 洪進華; 陳盟坤; 林雅慧; 莊煒琦; | 書刊名 | 大葉學報 |
卷 期 | 13:1 2004.06[民93.06] |
頁 次 | 頁11-15 |
分類號 | 448.532 |
關鍵詞 | 雷射二極體驅動電路; 低功率; 直流耦合; 交流耦合; Laser diode driver; Low power; DC coupling; AC coupling; |
語 文 | 中文(Chinese) |
中文摘要 | 本文提出一個低功率消耗的雷射二極體驅動電路,並討論直流耦合(DC coupling)與交流耦合(AC coupling)兩種介面電路來連接驅動電路與雷射二極體。我們使用台灣積體電路(TSMC)0.35mm的CMOS(complementary metal-oxide-semiconductor,互補式金屬氧化物半導體)製程參數來做模擬,其資料傳輸速率(data rates)是在1.25Gb/s的環境下執行。該驅動電路包含三個主要模組區塊:PECL(positive-referenced emitter-coupled logic)to CMOS邏輯電路、調變電流產生電路(modulation current generation circuit)、以及偏壓電流產生電路(bias current generation circuit)。在討論有關使用直流耦合(DC coupling)介面時,因為Headroom不足的問題而導致無法工作在1.25Gb/s的要求。所以我們加以討論使用交流耦合(AC coupling)介面電路來解決Headroom的問題(“headroom” 指的是單個線路路徑的總和個別元件的壓降與供應電壓 之間的比較)。 |
英文摘要 | In this paper, we present a low-power laser diode driver, using a DC (direct current) or AC (alternating current) coupling interface circuit to connect it with laser diode. The TSMC (Taiwan Semiconductor Manufacturing Company) 0.35mm 1P4M CMOS (complementary metal-oxide-semiconductor) technology parameters are used to simulate the circuit. The data rate of simulation is 1.25Gb/s. The proposed laser driver includes three blocks: PECL (positive-referenced emitter-coupled logic) to CMOS logic circuit, modulation current generation circuit and bias current generation circuit. Using a DC coupling interface circuit will result in the “headroom” problem, so that the data rate 1.25Gb/s cannot be achieved. Therefore, we adopt the AC coupling interface circuit to solve the “Headroom” problem. |
本系統中英文摘要資訊取自各篇刊載內容。