查詢結果分析
來源資料
相關文獻
- 小腦模式在馬達速度控制之實現
- Intelligent Control Theory in Guidance and Control System Design: An Overview
- Neural-Network Cross-Coupled Control System with Application on Circular Tracking of Linear Motor X-Y Table
- 應用類神經網路模式推估水文地質參數之研究
- Nonlinear PI Controller Design: a Neural Network Approach
- 建立飛機環控系統重要組件維修策略
- Fuzzy Sliding Mode Controller Design of Uncertain Nonlinear System
- 工廠監控資訊整合連線介面標準之探討
- 新建低放射性廢液處理廠程控系統的規劃
- 歐洲建築物管理與控制系統
頁籤選單縮合
題名 | 小腦模式在馬達速度控制之實現=Implementation of DC Motor Speed Control Based on CMAC |
---|---|
作者 | 陳珍源; 蔡樸生; Chen, Jen-yang; Tsai, Pu-sheng; |
期刊 | 中華技術學院學報 |
出版日期 | 20030400 |
卷期 | 26 2003.04[民92.04] |
頁次 | 頁160-169 |
分類號 | 448.22 |
語文 | chi |
關鍵詞 | 控制系統; 類神經網路; 滑動控制; 經驗法則; Control system; Neural-network; Sliding mode control; Heuristic rules; |
中文摘要 | 小腦模型是模仿人類小腦的一種學習架構,在實際應用上為一查表法。在控制領域設計中,較簡易直覺的作法是不需經過學習的過程而能使控制系統即可在忍受範圍內工作,進一步藉由輔助修正機制優化原系統參數達到線上學習的需求。欲實現小腦模式控制演算法,其最可行的辦法即是植入人類最豐富的經驗知識。因此本論文提出以邊界條件的方法,事先給定小腦模型之權重參數,使控制器不需經過學習即可工作。實驗結果驗證了我們設計的期望及滿意的成果。 |
英文摘要 | This paper proposes an intelligent Cerebella Model Articulation Controller (CMAC) with the sliding mode control. Generally speaking, the CMAC is first trained from an existed controller; then the CMAC can be used to instead of the original controller for achieving for achieving a fast operating system performance. Moreover, it can be easily realized through FPGA and operated in the requirement of real-time control cases. However, the overall performance of control system depends on the trained CMAC; usually, it is not easy to yield the same performance as the original controller Therefore, to improve the performance without learning process maybe is a good idea in designing the CMAC. The determination of the CMAC weights via the control scheme of sliding mode control provides a solution for designing such controller. Finally, the DC motor speed control is employed to illustrate the performance and applicability of the proposed control scheme. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。