查詢結果分析
來源資料
相關文獻
- 導電陶瓷材料的最佳放電加工技術與經驗公式之分析
- 利用田口實驗計劃法探討陶瓷材料放電加工參數之最佳化研究
- 超硬合金放電加工特性之研究
- 運用不同工作狀態下的Nd:YAG雷射對體外牙本質組織的切削應用研究
- 高速鋼放電加工特性之研究
- 添加石墨粉末之快速穿孔放電加工特性研究
- 磁力輔助放電加工對SKD61模具鋼加工特性影響之研究
- Comparative Studies of the Influence of Visible and Beta-Gamma Radiations on the Discharge Current in Chlorine under Ozonizer Excitation
- STC12C2052的對講機加密系統設計
- 應用於LED調光之低功率CMOS數位脈寬調變晶片設計
頁籤選單縮合
題名 | 導電陶瓷材料的最佳放電加工技術與經驗公式之分析=Optimization of Processing parameters and Analysis of Experimental Formula for Electric Discharge Machining of an Electro-Conductive Ceramic |
---|---|
作者 | 蔡德昌; 張福平; 江可達; Tsai, Der-chang; Chang, Fu-ping; Chiang, Ko-ta; |
期刊 | 技術學刊 |
出版日期 | 19971200 |
卷期 | 12:4 1997.12[民86.12] |
頁次 | 頁569-575 |
分類號 | 468.5 |
語文 | chi |
關鍵詞 | 放電電流; 脈衝寬; 被加工物去除率; 表面粗細度; 電極消耗率; Pulse current; Pulse duration; Workpiece removal rate; Surface roughness; Relative electrode wear; |
中文摘要 | 本文探討對導電陶瓷材料( Al �� O �� +30 % TiC )的放電加工之加工特性如 加工速度(被加工物去除率)、加工面粗細度與電極消耗率等之結果加以分析,進而獲得最 佳電氣加工參數特件,以期能獲得最佳的加工結果。由實驗結果顯示:在輸入不同能量如放 電電流( Ip )與脈衡寬(τ p )等對加工速度、 表面粗細度與電極消秏率等之放電加工 特性皆有顯著的影響。 並從實驗數據中,導出以放電電流( Ip )與脈波寬(τ p )的函 數表示的加工速度、加工面粗細度與電極消耗率之經驗公式。此外,也發現對導電陶瓷材料 最適合正極性加工,若再加上搖動機頭( Orbit-Cut ),將能更提高放電加工的品質。 |
英文摘要 | This study investigated electrical discharge machining (EDM) characteristics, such as workpiece removal rate, surface roughness and relative electrode wear, to gain the optimums of EDM and machining products for an electro-conductive ceramic (Al �� O �� +30%TiC). The experimental results showed that the effects of pulse current (Ip) and pulse duration (τ p) had significant influence on the workpiece removal rate, surface roughness and relative electrode wear. From experimental data, the experimental formula of workpiece removal rate, surface roughness and relative electrode wear were established as the function of pulse current (Ip) and pulse duration (τ p). Additionally, the electro-conductive ceramic was suitable for the process of electric positive polarity, and the orbit-cut machining head increased the quality of machining products in EDM. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。