查詢結果分析
來源資料
相關文獻
- 用灰色關聯分析法於冷軋鋼捲退火製程最佳化之研究
- 應用灰色關聯分析在作射出成形製程最佳化的研究
- 應用灰關聯分析在放電加工線切割法製程最佳化的研究
- Acurad Die Casting Process Optimization Using the Grey Relational Analysis Method Approach
- Optimization of Injection Molding Process for Fracture Toguhness Specimen in Fiber Reinforced Polycarbonate Composites Using Grey Relational Analysis
- 以排序法求解模糊經濟訂購量模式
- 混合基因演算法在渦輪葉片排序最佳化之應用
- 基於遺傳算法的振動主動控制最佳化方法研究
- 以排序最佳化法進行輸電系統負載裕度提升
- Distributed Broadcasting Algorithms in Rotator Graphs
頁籤選單縮合
題名 | 用灰色關聯分析法於冷軋鋼捲退火製程最佳化之研究=Process Optimization of Colded-rolled Coil Annealing by Using Gray Relational Analysis |
---|---|
作者 | 俞文華; 張士行; | 書刊名 | 中華技術學院學報 |
卷期 | 23 2001.09[民90.09] |
頁次 | 頁170-176 |
分類號 | 472.3 |
關鍵詞 | 最佳化; 排序; 定量化; 灰色關聯分析法; Optimization; Sorting; Gray relational analysis; |
語文 | 中文(Chinese) |
中文摘要 | 冷軋鋼在國內用途廣泛,可製成一般金屬家具外,亦可再加工,製成電腦外殼,自行車零組件等,因此我們以冷軋鋼中之CQ1(一般商用品級)材質冷軋鋼捲為材料。我們考慮軋下率、第一段恒溫溫度、第二段恒溫溫度、第一段恒溫時間、第二段恒溫時間,等五項為評量指標,求取出最佳製程條件,在調整其相關退火製程參數時,需要進行一連串試誤法,常需耗時且不易得到最佳的設計,採用灰色關聯分析法,可在最少實驗次數下求得最佳化的配置。 |
英文摘要 | This paper presents a fast and effective methodology for parameters of manufac turing process optimization of colded-rolled coil annealing. The colded-rolling coil is widely used in all over the country. Not just the metal furniture was made from colded-rolling coil, through the extra working, it also can be used to make computer case; parts of bike etc. For that reason, we use the CQ1 (Normal commercial Grade of C. R. coil) to be the material of research. The following five indications are use for decide optimal process of annealing: ratio of rolling compressed, the first stage isotherm temperature, the second stage isotherm temperature, the first stage isotherm time, The second stage isotherm time. The optimal experimental design method of this paper is that combines the gray Relational analysis method. This method can replace the traditional "change-one-parameter-at-a-time" approach which is very powerful, costly, time consuming and almost impracticable to yield an optimum solution. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。