查詢結果分析
來源資料
相關文獻
- 微型流道熱沉與熱管之製作與實驗
- Kinetics and Mechanism of the MgO-enhanced Transformation of Hexacelsian to Celsian Barium Aluminosilicates
- 非晶矽膜再結晶特性之線上光學檢測技術與表面形貌研究與分析
- A Comparison between Triangular Grooves, Star Grooves and Rhombus Grooves in Micro Heat Pipe Manufacture
- 以EBSD觀察鉻鉬鋼熱浸鋁矽塗層於高溫相變化之行為
- 三角形矽質微熱管之研製與測試
- 以EBSD觀察低碳鋼熱浸鋁矽塗層於高溫相變化之行為
- 矽膜相變化之線上光學檢測技術研發
- 染料分離、純化的應用技術
- Direct Simulation Monte Carlo of Monosilane Low Pressure Chemical Vapor Deposition
頁籤選單縮合
題名 | 微型流道熱沉與熱管之製作與實驗=Experimental Investigation of Microchannel Heat Sinks and Heat Pipes |
---|---|
作者姓名(中文) | 楊龍杰; 康尚文; 杜文謙; | 書刊名 | 國立臺灣大學工程學刊 |
卷期 | 80 2000.10[民89.10] |
頁次 | 頁59-77 |
分類號 | 448.57 |
關鍵詞 | 矽; 微流道; 熱沉; 相變化; 微熱管; 星形流道; 毛細作用; 現地量測; 微型感測器; Silicon; Micro channel; Heat sink; Phase change; Micro heat pipe; Star channel; Capillarity; On-site measurements; Micro sensor; |
語文 | 中文(Chinese) |
中文摘要 | 隨著電子元件速度增快,發熱量日益升高,散熱成了提昇元件性能與穩定運作的重要課題。以微機電製程所製作的矽質微流道熱沉與微熱管均熱片,提供另一種新的散熱思維與途徑。本文以實際微機電元件之製作測試及相關簡要的數據分析,探討此二種矽質微流道散熱元件的流力特性及相變化熱傳性能,特別是針對微流道中的汽泡成核機制、微熱管的熱傳導係數、以及微流道內部監控量測之可行性,作一回顧式之報告。 |
英文摘要 | With the improvement of circuit density and operating speed, more heat is generated by the electronic elements. Heat dissipation has become a significant issue in efficiency promotion and stable operation. Silicon based micro heat sinks and micro heat pipes fabricated by MEMS technology may provide new ideas and approach of efficient cooling. Experimental tests and theoretical analysis were conducted to investigate the characteristics of fluid flow and heat transfer in these micro cooling elements. Especially, subjected to the mechanism of bubble nucleation, thermal conductivity of micro heat pipe and the possibility of monitoring measurements inside micro channel. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。