查詢結果分析
相關文獻
- A Network-Topology-based Three-Phase Load Flow for Distribution Systems
- Feeder Load Distribution Estimation and Its Effect on Switched Capacitor Scheduling
- Self-Tuning of Fault Detection Threshold for High Impedance Fault Detection
- 配電系統汽電共生廠保護協調設計實例
- 臺灣中小型機械廠協力網路結構之探討
- 配電系統自動化之探討
- 應用乏晰動態規劃法於饋電線電容器組調度
- The Application of AM/FM System to Distribution System Service Restoration
- 地下配電系統
- 電壓閃爍介紹與改善
頁籤選單縮合
題 名 | A Network-Topology-based Three-Phase Load Flow for Distribution Systems=以網路結構為基礎之配電系統三相負載潮流分析 |
---|---|
作 者 | 鄧人豪; | 書刊名 | Proceedings of the National Science Council : Part A, Physical Science and Engineering |
卷 期 | 24:4 2000.07[民89.07] |
頁 次 | 頁259-264 |
分類號 | 448.3 |
關鍵詞 | 網路結構; 配電系統; 三相負載潮流分析; Distribution automation system; Distribution load flow; Distribution management system; Gauss implicit Z matrix method; Newton-Raphson method; |
語 文 | 英文(English) |
英文摘要 | A network-topology-based three-phase distribution power flow algorithm is developed in this paper. The special topology of a distribution network has been fully exploited to make obtaining a direct solution possible. Two developed matrices are enough to obtain the power flow solution: they are the bus-injection to branch-current matrix and the branch-current to bus-voltage matrix. The traditional Newton Raphson and Gauss implicit Z matrix algorithms, which need LU decomposition and forward/backward substitution of the Jacobian matrix or the Y admittance matrix, are not needed for this new development. The features of this method are robustness and computer economy. Tests show that the proposed method converges in almost all circumstances for distribution systems and has great potential for use with distribution automation system. |
本系統中英文摘要資訊取自各篇刊載內容。