查詢結果分析
相關文獻
- Effect of NiO Supported on Activated Carbon for Adsorption and Desorption of MEK Vapor
- 有機溶劑採樣中相對溼度對活性碳吸附管之影響
- Predicition of the Adsorption of Binary Mixtures (Mek and Tol) on Activated Carbon
- 活性碳纖布浸染銅離子及其對硫化氫吸附研究
- 活性碳吸附塔之操作維護介紹
- 以活性碳吸附處理染料廢水之探討
- 以活性碳吸附甲烯藍之反應動力式及恆溫吸附模式之探討
- 活性碳纖維於甲烷儲備系統之應用
- 以粒狀活性碳及活性碳纖維處理氣相有機物之研究比較
- Adsorption of Binary Dye Solution Onto Activated Carbon: Isotherm and Breakthrough Curves
第1筆 /總和 1 筆
/ 1 筆
頁籤選單縮合
題名 | Effect of NiO Supported on Activated Carbon for Adsorption and Desorption of MEK Vapor=活性碳添加NiO對甲基乙基酮蒸氣吸脫附的影響 |
---|---|
作 者 | 尤建華; 梁賀程; 張保興; 黃福全; | 書刊名 | 中國環境工程學刊 |
卷期 | 9:3 1999.09[民88.09] |
頁次 | 頁135-143 |
分類號 | 460.025 |
關鍵詞 | 吸附; 活性碳; 揮發性有機蒸氣; 氧化鎳; Adsorption; Activated carbon; Volatile organic compound; NiO supported; |
語文 | 英文(English) |
中文摘要 | 本研究主要探討活性碳浸添NiO對甲基乙基酮蒸氣吸脫附的影響。研究上利用孔隙分析儀、ICP等分析活性碳浸添NiO對其物化特性的改變,並以吸附系統及TGA分析儀探討其對甲基乙基酮蒸氣吸脫附的影響。研究結果顯示;隨著浸添NiO量的增加活性碳,活性碳比表面積與體積有逐漸變小,而孔隙分佈平均直徑有變大現象。對於甲基乙基酮蒸氣吸附特性顯示;在少量添加NiO的活性碳有較佳的吸附特性(吸附容量、吸附速率常數、空床長度等)。至於脫附特性則顯示;活性碳在添加NiO後約可降低熱脫附溫度30-40℃,而分析此原因發現NiO的添加將增加其熱脫附外觀活化能與速率常數。 |
英文摘要 | In this investigation. NiO supported on activated carbons were prepared. The properties of specific surface area, pore volume, and chemical metal content of the adsorbents were char-acterized by micropore analysis, ICP, and X-Ray diffraction (XRD). The adsorption apparatus and TGA instrument were used to measure the kinetic data of adsorption and thermal desorption for MEK vapor. All experimental results were used to evaluate the effect of NiO supported on activated carbon for adsorption and thermal desorption of MEK vapor. The results showed that when AC was impregnated with a highly concentrated solution of Ni nitrate, the pores of the activated carbon may be blocked and the favorable geometrical arrangement of adsorbed molecules over the surface may be hindered. Comparisons of adsorption capacity, the length of unused bed (LUB), adsorption zone (H ), and adsorption rate constants of activated carbon and activated carbon with NiO additive showed that AC-0.1 M NiO had the best characteristics for the adsorption of MEK vapor. From thermal desorption tests, the completed temperature (Te) of the activated carbon with NiO additive significantly decreased by about 30-40℃, in the thermal desorption process. The apparent activation energies of adsorbents for MEK in the thermal desorption process were 29.0-36.6kJ/mole. NiO addition to activated carbon increased both the apparent activation energy and the rate constant. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。