查詢結果分析
相關文獻
- Effect of La, W, and Mo on Resistivity to Coke Formation and Sintering of Nickel-Alumina Catalysts
- 鉬元素對液相燒結鎢基重合金顯微結構之影響
- 燒結W-8Mo-7Ni-3Fe鎢鉬重合金微結構變化與機械性質之關係
- 燒結W-8Mo-7Ni-3Fe之鎢基重合金中鎢鉬原子在基地相中的固溶析出行為探討
- 活化燒結對鉬燒結體的脆裂行為研究
- WC-10℅Ni及添加Cr固溶強化之超硬合金製程與機械性質研究
- 超硬石金之微結構分析與刀具性能控制
- 液相燒結鎢基重合金顯微組織與射出成形研究
- 高能活化液相燒結鎢銅合金
- 鉬之活化燒結機構探討及微結構分析
頁籤選單縮合
| 題 名 | Effect of La, W, and Mo on Resistivity to Coke Formation and Sintering of Nickel-Alumina Catalysts=添加鑭、鎢及鉬對Ni/Al[feaf]O[feb0]觸媒的焦炭形成及燒結之抵抗性 |
|---|---|
| 作 者 | 陳炎輝; 陳範倫; | 書刊名 | Journal of the Chinese Institute of Chemical Engineers |
| 卷 期 | 30:5 1999.09[民88.09] |
| 頁 次 | 頁397-404 |
| 分類號 | 460.02 |
| 關鍵詞 | 添加鑭; 鎢; 鉬; Ni/Al[feaf]O[feb0]觸媒; 焦炭形成; 燒結; La; W; Mo; Coke formation; Nickel sintering; |
| 語 文 | 英文(English) |
| 中文摘要 | 本研究在探討添加鑭、鎢及鉬促進劑之Ni/Al□O□觸媒在正己烷裂解反應中,對焦 碳形成和鎳燒結的抵抗性,其反應條件為773K、一大氣壓。反應前後的觸媒以X射線繞射儀 (XRD),可程式加溫還原儀(TPR),可程式加溫脫附儀(TPD),可程式加溫積碳氫化反應儀(TPH), 和碳含量分析來量測其特性。實驗結果顯示,添加鑭、鎢及鉬促進劑能顯著地改善Ni/Al□O □觸媒鎳燒結的抵抗性,且鉬和鎢促進劑能降低觸媒的積碳速率。添加促進劑的鎳觸媒依積 碳速率大小來排序,與依共TPD及TPH的波峰溫度大小的觸媒排序相符,即鎳-鑭〉鎳-鎢〉鎳- 鉬觸媒。 |
| 英文摘要 | Resistivity to coke formation and nickel sintering during catalytic cracking of n-hexane at 773K and 1 atm has been investigated over nickel-alumina catalysts with promoters such as La, W, and Mo, respectively. The characterizations of fresh and spend catalysts were analyzed by X-ray diffractometer (XRD), temperature- programmed reduction (TPR), temperature-programmed desorption (TPD), temperature-programmed hydrogenation of carbon deposit (TPH), and chemical analysis of carbon. Results show that the resistivity to nickel sintering of promoted nickel-alumina catalysts is improved significantly by addition of Mo, W and La. The promoters Mo and W also decrease coking rate of nickel catalysts. The ordering of promoted nickel catalysts by the coking rate is in accordance with that by the peak temperature of both TPD and TPH spectra of these catalysts, which is Ni-La>Ni-W>Ni-Mo catalyst. |
本系統中英文摘要資訊取自各篇刊載內容。