頁籤選單縮合
題名 | 電腦軟體應用於陸地砂石專用區開發規劃=A Case Study of Computer Applications in Surface Mining Design |
---|---|
作者 | 丁原智; 林聖雄; | 書刊名 | 鑛冶 |
卷期 | 43:2=166 1999.06[民88.06] |
頁次 | 頁149-152 |
分類號 | 459.5 |
關鍵詞 | 模擬礦床模型; Ore deposit model simutation; |
語文 | 中文(Chinese) |
中文摘要 | 現階段國內資源開發設計一般多是以傳統方式繪製設計,偶輔以電腦繪圖,此種 方式不僅做圖、礦量的估算費時,且圖要保存或修改均不易,若皆由電腦軟體運作,則做圖 、礦量及開採量的計算皆可改善傳統方法的缺點,以便每一開發階段之工作能實際配合原設 計規劃進行。用電腦軟體做資源開發設計一般須以當地的地形、坡度、實地鑽孔的資料和地 質圖來考慮。依此模擬礦床模型,進行蘊藏量計算,開採階段面的設計、採台的布置及開採 量的計算等。如地質資料含有礦石品位,則可估算開採區各品位等級所含礦量多寡,以使開 採更具彈性。本文即是以宜蘭縣地砂石專用區開發規劃為案例,以上述方式進行更有效率且 精確之規劃設計。成果包括地質剖面圖、礦床模型、蘊藏量、階段面的設計、採台的市置、 開採量及開採前後的地形變化等。為因應資訊時代的來臨,資源之開發設計更需使用電腦軟 體來進行,才能達到省時方便,符合資訊時代的精神。 |
英文摘要 | The current mining design practices in Taiwan are mainly conducted using conventional hand calculation and drawing with little aid of computer. By doing this, the reserve calculation is time consuming and to make the modification of drawing even more difficult. If it could be carried out with computer, then the above mentioned difficulties would be avoided. The computer-aided mining design requires some base terrain data such as topography, geology, and drilling data to construct the orebody model, calculating reserve, designing mining steps and doing mineable reserve calculations. The purpose of the paper is to use I-Lan aggregate mining project as an examplic to demonstrate the use of computer-aided mining design that can be more efficient and accurate in design and reserve calculation. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。