查詢結果分析
來源資料
相關文獻
- 單向迴圈佈置的機器順序定址之研究
- 87年度最高/低溫度統計預報成果分析
- 利用遞迴程序法與圖解技巧法對時間數列資料作ARMA模式判定之探討
- NCEP RSM之2001年東亞地區短期氣候模擬研究與平均誤差去除法
- A Combined Method Using Modified Routh Stability Array and MSE Criterion for the Reduction of Discrete-Time Systems
- 利用最小平方平均誤差法則做盲目強制歸零等化
- 盈餘、現金流量與股票報酬關係之研究
- UHF頻段功率放大器電路保護裝置設計
- 應用分量迴歸於大量估價之增進--以新北市高價七區為例
頁籤選單縮合
題名 | 單向迴圈佈置的機器順序定址之研究=The Facilities Location Problem Under Unidirectional Loop Network Layout |
---|---|
作 者 | 蔣治平; | 書刊名 | 正修學報 |
卷期 | 12 1999.07[民88.07] |
頁次 | 頁157-162 |
分類號 | 448.94 |
關鍵詞 | 單向迴圈佈置; 平均誤差; Sequencing; D&C; Unidirectional loop network layouts; Relative locations; Mean deviations; |
語文 | 中文(Chinese) |
中文摘要 | 單向迴圈佈置具有高途程彈性,低設置成本的優點,因此廣為實務界所應用。本研究的目 的即在單向迴圈佈置下發展安置機器相對順序的方法,以使得總搬運成本最小化。本研究發展出 Sequencing、D&C及其改進程序的啟發式演算法,演算法的求解品質經與0-1整數模式所得之最佳 解比較後,印證本研究的方法在品質與效率上均獲得令人滿意的結果,尤其是D&C配合Improving 演算程序的效用比起類似的演算法在平均誤差上較為穩健。 |
英文摘要 | In automated manufacturing environments. Unidirectional loop network layouts are extensively implemented due to the wide use of efficient unicyclic material handling networks. In this paper, we address to determinate the elative locations of workstation in loop network layouts for minimizing the total material handling cost. Two constructed heuristic procedures, sequencing and D&C, are developed, and an improvement procedure is used to obtain better solving qualities. The experiment results are reported and compared to that of literatures. We show that D&C procedure attains lower mean deviations of the material handling cost than other solving Procedures do. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。