查詢結果分析
相關文獻
- System Architecture of the IPEI Payload on ROCSAT-1
- Scientific Mission of the IPEI Payload Onboard ROCSAT-1
- The ROCSAT-1 IPEI Preliminary Results: Low-Latitude Ionospheric Plasma and Flow Variations
- The ROCSAT-1 IPEI Preliminary Results: Vertical Ion Drift Statistics
- 簡介中華衛星一號電離層電漿及電動效應儀
- 中華衛星一號研發概況與成效
- 利用GPS觀測量構建即時的區域電離層模型之研究
- Development of ROCSAT-1 Program
- Ocean Color Imager: Instrument Description and Its Performance
- The Scientific Project for ROCSAT-1/OCI
頁籤選單縮合
題名 | System Architecture of the IPEI Payload on ROCSAT-1=中華衛星一號電離層電漿電動儀之系統架構 |
---|---|
作者姓名(中文) | 張友信; 江文隆; 應松榮; | 書刊名 | Terrestrial, Atmospheric and Oceanic Sciences |
卷期 | 增刊 民88.03 |
頁次 | 頁7-18 |
分類號 | 447.964 |
關鍵詞 | 中華衛星一號; 電離層; 電漿電動儀; Ion temperature; Ion concentration; Ion velocity; Ion composition; Satellite; |
語文 | 英文(English) |
英文摘要 | The Ionospheric Plasma and Electrodynamics Instrument (IPEI) is one of the three payloads on the ROCSAT-1 satellite. The IPEI consists of two major packages:Sensor Electronics Package (SEP) and Main Electronics Package(MEP). The SEP carries four sensors: an Ion Trap (IT), Horizontal and Vertical Drift Meters (HDM and VDM), and a Retarding Potential Analyzer (RPA). These sensors measure ion concentration, ion temperature, cross-track ion velocity, and major ion composition at the satellite position along the ROCSAT-1 orbit. This will nominally yield coverage at 600km altitude within the latitude band of ± 35 °. The MEP contains four major parts: a digital processing unit (DPU), command interface, science data interface, and power supplies. The MEP provides the electrical interface between IPEI and the spacecraft. Also, the MEP implements the operational modes of IPEI: NORMAL, FAST, and AUTO. In the NORMAL mode the IT, HDM, and VDM provide measurements of the total ion concentration and the cross-track ion drift velocity at 32 Hz, while the RPA provides the in-track ion drift, the ion temperature and the major ion composition at a nominal 1/2 Hz rate. In the FAST mode these sample rates are 1024 Hz and 1/4 Hz respectively. The AUTO mode enables IPEI to switch from the default NORMAL mode to the FAST mode when sudden large changes in the ion concentration, commonly associated with plasma structures called bubbles, are detected. The unique feature of the AUTO mode allows the scientists to investigate spatial structures with scale sizes as small as 16 meters. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。