查詢結果分析
來源資料
頁籤選單縮合
題名 | 鋼板工場軋延線電氣設備更新案簡介=Modernization of Electrical Equipment for Rolling Area of Plate Mill |
---|---|
作者姓名(中文) | 蔡村興; | 書刊名 | 技術與訓練 |
卷期 | 24:3=196 1999.06[民88.06] |
頁次 | 頁1-12 |
專輯 | 軋鋼專集 |
分類號 | 472.3 |
關鍵詞 | 驅動器; 控制模式; 更新; Drive; Control mode; Renew; |
語文 | 中文(Chinese) |
中文摘要 | 鋼板工場軋延線電氣設備更新案蓋之範圍,係由Mill Approach Table到Mill Runout Table, 配合各設備之重要性及功能需求等做不同程度之更新, 其內容大致如下:A. 主軋機、Mill Approach Table 及 Mill Runout Table 直流馬達不變, 驅動器由 GE 設備 改為 LEOPACK u/E。 B.Front/Back Table、 Front/Back Feed Roller、Screwdown 及 Sideguide 直流馬達改為交流馬達;驅動系統改為 TOSVERT-u/S250W。 C.Screwdown 自動 定位控制系統改為由 PCS 控制,且機機之 Worm Gear 由二螺旋改為四螺旋,而 Sideguide 則新定位控制亦由 PCS 控制。 D.Mill Master Control 及輔助設備改為由 PCS 控制。 並 新增 Tracking System、 OIS (MMI) System 等功能。由於科技之日新月異、一日千里,故 新設備能提供高度自動化、彈性化功能且可即時監控警報及記憶資料事後分析,勢必對生產 的量與質均能予以提昇。 |
英文摘要 | The revamping area of this project is from Mill Approach Table to Mill Runout Table. The extent of revamping for each equipment was based on its importance and functional requirements. Revamping items show as follow: A.Main drive、Mill Approach Table and Mill Runout Table DC motors remain unchanged, but the drives were replaced with Leopack u/E. B.Front/Back Table, Front/Back Feed Roller, Screwdown and Sideguide DC motors & drives were replaced with VVVF motors & Tosvert-u /S250W. C.Screwdown Auto-Positioning Control system was renewed with PCS system, besides its speed was increased by changing the mechanical gear ratio. Sideguide was enhanced with new position control function by PCS system. D.Mill Master Control、Auxiliary device were all renewed with PCS systems, and enhanced with new functions such as the control mode, plate tracking & OIS (MMI) etc. Due to the everchanging new technology, new equipment provides highly automation and sophisticated functions which lead to enhancements of productivity and quality. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。