查詢結果分析
相關文獻
- Mechanical Parts Range Image Segmentation by Locating Critical Points of One-Dimensional Curves
- Characterization of Surface Height Distributions
- Running-In Wear Simulations for Surfaces from Different Manufacturing Processes
- 用於機械元件的鐵系素形材的技術動向
- 機械元件實體模型電腦輔助設計系統之發展
- 常態混合模式的模糊分割之資料模擬研究
- 調質鋼力學性能的十種影響因素與措施
- 從機械元件到整合設計的認知--一位學機械工程者應有的觀念
- 微機械與微塑膠元件簡介
- 利用多方格連接與全通匯流排計算機求旋積及確定特徵值之分割演算法
頁籤選單縮合
題名 | Mechanical Parts Range Image Segmentation by Locating Critical Points of One-Dimensional Curves=一維曲線轉折點定位在機械元件高度影像分割之研究 |
---|---|
作者 | 范光照; 李吉群; Fan, Kuang-chao; Lee, Ji-chun; |
期刊 | 中國機械工程學刊 |
出版日期 | 19990200 |
卷期 | 20:1 1999.02[民88.02] |
頁次 | 頁21-27 |
分類號 | 446.84 |
語文 | eng |
關鍵詞 | 機械元件; 高度影像; 分割演算法; Range image segmentation; Split and merge; Curve fitting; Edge linking; |
中文摘要 | 本研究提出以修正之邊線識別為基礎,適用於機械元件高度影像之分割演算法。 此法可局部平行處理,增進處理速度。文中之機械元件係以平面、圖柱面及球面所組成。首 先,將高度影像之每一行或列視為一條一維曲線,並以一維曲線轉折點定位法擷取轉折點, 而形成轉折點影像。接著以形態擴張、細線化及區域連接標示法處理此影像,所有屬於同一 四連接區域之像素被指定唯一之編號。 |
英文摘要 | A modified edge-based partially parallel segmentation algorithm specially designed for the range image processing of mechanical parts is proposed. The mechanical parts considered here are composed of planes, cylindrical and spherical surfaces. At first, a set of critical points is extracted from each row and column of the range image using the one-dimensional curves' segmentation technique. After that, a connected component labeling procedure is executed and all pixels belonging to the sane 4-connected region are assigned a unique label. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。