查詢結果分析
來源資料
相關文獻
- 遙測與地理資訊系統應用於集水區水文模擬之技術探討
- 從地理期刊之發表探討臺灣近卅年來地圖學之發展趨勢
- 整合地理資訊系統與遙測技術於林分材積估側之研究
- 利用地理資訊系統和衛星遙測估算林分材積
- 整合遙測、地理資訊系統及衛星定位系統在自然資源經營的應用--美國科羅拉多州立大學森林系Roger M. Hoffer教授演講摘要
- State-of-the-art Technologies of Forest Inventory and Monitoring in Taiwan
- 衛星遙測與GIS於縣市政府山坡地監測管理
- 賀伯颱風災害後嘉義山坡地新增裸地之空間分析
- 遙測影像(RS)、地理資訊系統(GIS)、全球衛星定位儀(GPS)應用在森林火災之研究
- 結合遙測技術與地理資訊系統以建立集水區降雨資料推估模式之研究--以臺灣北部地區為例
頁籤選單縮合
題 名 | 遙測與地理資訊系統應用於集水區水文模擬之技術探討=Technical Study on the Application of Remote Sensing and Geographic Information System to Watershed Hydrologic Modeling |
---|---|
作 者 | 衛強; 鄭克聲; | 書刊名 | 農業工程學報 |
卷 期 | 44:3 1998.09[民87.09] |
頁 次 | 頁38-50 |
分類號 | 436.124 |
關鍵詞 | 遙測; 地理資訊系統; 水文模擬; Remote sensing; Geographic information system; Hydrologic modeling; |
語 文 | 中文(Chinese) |
中文摘要 | 對於集水區管理單位而言,完備之地文及水文資料乃是管理上最基本以及最重要 之依據。如何有效的整合這些基本資料,從蒐集到維護、管理、分析,進而能運用這些資料 來模擬、預測管理區域內各項水文單元之操作狀況,在實用上甚具價值。本文以遙測影像處 理系統與地理資訊系統,應用於水文模擬作深入之技術探討,期能完整描述空間狀況與水文 條件,成為一有效之水文模擬模式供有關單位實際運用。 本文以北勢溪流域集水區為例,以遙測與地理資訊系統彙整分析集水區內各項地文、水 文參數,並依上下游關係聯結各子集水區之網路來模擬整個流域之逕流狀況,同時對產生地 文參數過程作較深入之技術探討。網路架構並配合設計之使用者界面,可依使用者需要彈性 運用,組合出集水區河道演算、蓄水演算等流況,並可於控制點求得其逕流歷線。本文針對 數場實際暴雨事件進行逕流模擬,以檢定流域之地文參數。經檢定結果北勢溪之地文參數CN 值應介於50與60之間。本文論述之方法若能進一步分析臺灣其他小型集水區之逕流狀況,並 針對個別集水區長短不同延時降雨特性與地文參數加以嚴謹之鑑定,相信對未來臺灣地區集 水區水文模擬有相當助益。 |
英文摘要 | Hydrologic and geomorphologic data are vitally important for a successful watershed management. Integration of these data into a practical and operational usage is an emergent need due to recent technology development in spatial data management and analysis. This study discusses the technical details of integrating spatial data and traditional hydrologic data into a watershed hydrological model. Using Beh-Shi-Hsi, a small watershed upstream of Fei-Tsuei Reservoir, as an example, we demonstrate that many geomorphologic and hydrologic parameters can be calculated and linked to form a modeling network that assimilating the natural stream network by using remote sensing techniques and geographic information system. Flow hydrographs of several historic storm events were simulated for the purpose of curve number (CN) calibration. The results indicate that CN values suggested by SCS usually leads to overestimation of peak flow rates in the study area. |
本系統中英文摘要資訊取自各篇刊載內容。