查詢結果分析
相關文獻
- Introduction to PORITE Bearings
- 語音壓縮標準G.723.1在C62X DSP上的設計
- Tandem Spinal Stenosis: Clinical Diagnosis and Surgical Treatment
- 無覆蓋式層狀角膜整型術應用於近視的治療
- 掃描式電子顯微鏡觀察窩隙牙釉質處理對封劑穿入及密合之影響
- TPE的中空吹氣成型
- Cervical Laminoplasty with Miniplates and Screws: Technical Note
- Effects in Shear Strength for Solid and Hollow Cylinder Specimens on a Fine Sand
- 中空鋼筋混凝土實尺寸橋柱之韌性試驗
- 雷射懸雍垂侸咽整型術
頁籤選單縮合
題 名 | Introduction to PORITE Bearings=保來得軸承介紹 |
---|---|
作 者 | 李輝隆; | 書刊名 | 粉末冶金會刊 |
卷 期 | 22:3 1997.08[民86.08] |
頁 次 | 頁220-223 |
分類號 | 446.875 |
關鍵詞 | 含油軸承; 中空; 整型; 同軸度; |
語 文 | 英文(English) |
中文摘要 | 本文主要介紹日本保來得(PORITE)公司於1996年獲日本粉末冶金協會(JAPAN POWDER METALLURGY ASSOCIATION) 所頒發的設計開發獎 - 中空軸承 (CENTER FREE HEARING)。 在以往需要用切削 (MACHINING) 方式來達成的中空部份,在新的製程中僅需利 用一次整型 (SIZING) 工程即可獲得所需的中空軸承。這不僅對傳統上使用的雙件型軸承同 軸度 (COAXIALITY) 有很大的改善, 並能大大地降低成本。 另本文中也針對保來得的專利 YBF、BCF、LFP、HSP、DMP 軸承的應用作簡單之介紹。 |
英文摘要 | This paper introduces the PORITE center-free bearings that won the Japan Powder Metallurgy Association's (JPMA) 1996 development award. The newly developed method produces a bearing with a center-free shape by using only one sizing process to eliminate the machining operation that had been performed in the past. By introducing a center-free shape on the inner diamteer, the coaxiality of the bearing has been improved and a cost reduction has also been achieved. Some typical PORITE bearing materials, e.g. YBF,BCF,LFP,HSP and DMP are introduced in this paper also. |
本系統中英文摘要資訊取自各篇刊載內容。