查詢結果分析
來源資料
相關文獻
- NiAl/Al[feaf]O[feb0]複合材料之高溫機械性質研究
- 銲道夾渣對船用高張力鋼板破壞韌性之影響
- Optimization of Injection Molding Process for Fracture Toughness Specimen in Fiber Reinforced Polycarbonate Composites
- 臺北捷運噴射灌漿改良土之力學性質
- 具導電性之氮化鈦--氮化矽複合材料的加工與特性研究
- 呋喃模砂添加劑與硬化時間對其性質及變形量的影響
- 層狀氮化矽複合材料製程及機械性質之研究
- 加州黑櫟木及龐德羅沙松木之破壞與音放射
- 木理傾斜角對木材壓縮、硬度與噴砂特性之影響
- 方栓斜接應用於組合板接合之研究
頁籤選單縮合
題名 | NiAl/Al[feaf]O[feb0]複合材料之高溫機械性質研究=High Temperature Mechanical Properties of NiAl/Al[feaf]O[feb0]Compound |
---|---|
作者姓名(中文) | 楊士奇; 黃啟祥; | 書刊名 | 陶業學刊 |
卷期 | 1:2 1997.07[民86.07] |
頁次 | 頁16-23 |
分類號 | 440.34 |
關鍵詞 | 高溫機械性質; 壓縮強度; 破壞韌性; NiAl; Al[feaf]O[feb0]; Compressive strength; Fracture toughness; |
語文 | 中文(Chinese) |
中文摘要 | 以往的研究結果顯示NiAl/Al�烙�婪亳あX燒結體具有比NiAl更為優異的室溫機械性 質。為繼續開發並瞭解此 NiAl/Al �� O �婪亳あX材料之高溫機械性質,本研究以壓縮法及 單邊缺口樑法 (SENB) 檢討了 NiAl/Al �� O �婪亳あX燒結體之高溫強度及韌性。 NiAl/Al �� O �婪乘鶺ˋN結體的壓縮強度是分別以二種十字頭速率( 0.1mm/min, 0.01mm/min) 於 600~1200 K間的溫度下測得。實驗結果顯示:含 16.5 vol%Al �茨� O �婪酊� NiAl/Al �� O �婪亳あX燒結體之高溫壓縮強度較僅含微量 Al �� O �� (3.4vol%) 之試樣強,在 1000K 時仍有 400 MPa 之壓縮強度值。 此二試樣之脆韌轉換溫度( DBTT) 亦隨著夾頭速率由 0.01 增加至 0.1mm/min 而有提昇之現象。各試樣的破壞韌性值隨測試溫度的提昇而呈增加 的趨勢, NiAl/3.4vol%Al �� O �婪亳あX燒結體之試樣在 1000K 時有本研究中最高之破壞 韌性值 26.3MPa.m1/2。 |
英文摘要 | It is reported that the NiAl/Al�茨是�婪� composites have better room temperature mechanical properties than that of NiAl. In order to develop the NiAl/Al �� O �婪� composites, to understand the high temperature mechanical properties of NiAl/Al �� O �婪� composites is necessary. In this study, the high temperature strength and toughness was investigated by the compressive testing method and SENB method respectively. The results show NiAl/16.5vol%Al �� O �婪� composite had higher compressive strength than NiAl/3.4vol%Al �� O �婪� composite, and it's compressive strength is 400 MPa at 1000K. The Brittle ductile transition temperature (BDTT) of both NiAl/Al �� O �婪� composites with increasing cross-head rate, from 0.01 to 0.1mm/min. NiAl/3.4vol%Al �� O �婪� composite had the maximum fracture toughness of 26.3 MPa.m 1/2 at 1000K. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。