查詢結果分析
來源資料
相關文獻
- 感應電動機向量控制策略設計
- 田口式實驗法應用於向量控制感應電動機的模式建立與驗證
- Self-Tuning Speed Controller Design of Vector Control Induction Motor Drives
- 感應馬達控制法則在觀念整合上應有的認識
- 感應電動機無速度感測器的向量控制
- 感應電動機弱磁控制方法簡介
- 利用DSP控制器實作馬達向量控制功能--結合向量控制、DSP和低計數編碼器
- Modeling and Analysis of Vector Control for the Hydraulic Motor of an Electro-Hydrostatic Actuator
- Temperature-Based Optimal Test Sequence for Determining the Equivalent Circuit Parameters of a Three-Phase Induction Motor
- 應用極點配置法設計向量控制感應馬達之速度控制器
頁籤選單縮合
題 名 | 感應電動機向量控制策略設計=The Design Strategies of Vector-Controlled Induction Motors |
---|---|
作 者 | 張永華; 陳宏益; 鄭瑞裕; 林琮焜; | 書刊名 | 電力電子技術 |
卷 期 | 39 1997.06[民86.06] |
頁 次 | 頁87-95 |
專 輯 | 「次世紀變頻器技術」 |
分類號 | 448.22 |
關鍵詞 | 感應電動機; 向量控制; 磁場導向控制; Index terms-induction motor; Vector control; Field-oriented control; |
語 文 | 中文(Chinese) |
中文摘要 | 向量控制(Vector Control)(或稱磁場導向控制(Field-Oriented Control)應用在 感應馬達控制上已有二十餘年,拜科技之賜,由於微算機處理能力增強,使得方法在馬達控 制上能符合工業要求的性能。但對研究人員而言,向量控制法應採用直接抑或間接架構? 轉 子或定子磁場導向? 不同的架構所衍生出來的研究方向各異,解決問題的方法也就自然不同 。本論文將逐一介紹各種設計技術,並予以模擬比較,提供研究人員參考,節省摸索時程, 以期後續實體可以驗證。 |
英文摘要 | The method of Vector Control (or Field-Oriented Control) has been used in induction motors for more than 20 years. Recently, due to the improvement of microprocessors, the vector control techniques can be satisfied to the inustry requirements. However, the decision of the adopted model, direct or indirect, rotor resistance or stator resistance field-oriented, is still up to researchers. There will be different problems with the associated structures, and the design strategies will be also different. This paper will present several Vector Control techniques, and provide many simulation results. To researchers, this paper can be used as a tutorial guide, such that the developing period can be reduced. |
本系統中英文摘要資訊取自各篇刊載內容。