查詢結果分析
相關文獻
- 聚丙烯-玻璃纖維複合材料機械性質之研究
- 金屬複合針織物補強熱可塑性複合材料之電氣與機械性質之研究
- 銅纖維強化熱可塑性複合材料電氣性質之研究
- 銅纖維強化熱可塑性織物複合材料機械性質之研究
- 銅纖維強化熱可塑性複合材料電磁遮蔽性質之研究
- 車縫結構對玻璃纖維強化聚丙烯不織布複合材料抗拉性質影響之研究
- The Toughness Behavior of Fiber Reinforced Concrete
- 吸濕排汗--多層結構紗之研究
- 多軸多層經編織物和非織物強化不飽和聚酯積層板受非穿透性衝擊破壞之觀察
- Improvements in the Cross-Sectional Structure of Composite Yarn
頁籤選單縮合
題名 | 聚丙烯-玻璃纖維複合材料機械性質之研究=The Study of Mechanical Properties of Glass Commingled Fabric Reinforced Composites |
---|---|
作者姓名(中文) | 周耿志; 李貴琪; 鄭國彬; | 書刊名 | 華岡紡織期刊 |
卷期 | 4:2 1997.03[民86.03] |
頁次 | 頁166-170 |
分類號 | 440.34 |
關鍵詞 | 玻璃纖維; 複合紗; 熱可塑性複合材料; Glass fiber; Commingled yarn; Thermoplastic; Composite material; |
語文 | 中文(Chinese) |
中文摘要 | 本研究係採玻璃纖維為強化材,以熱可塑性聚丙烯樹脂為基材,經由中空錠子精紡機,紡製成複合紗。再將所紡製之複合紗,以纏繞模具的方式施以熱壓成型,藉以改善複合材料之含浸效果,並探討其機械性質。 由實驗結果得知以複合紗所製成之熱可塑性複合材料,對含浸效果之改善有其正面的影響。機械性質在成型溫度為190°C∼230°C時,隨著成型時間的增加有漸升的趨勢;成型溫度在 205°C∼230°C時,則隨著成型時間的增加而有降低的趨勢。 |
英文摘要 | Glass fiber and polypropylene were used as the reinforced fiver and the matrix fiber in this study. The commingled yarn was spun by Hollow-spindle spinner. The wrappin mold method was employed to form the sample of hot press, and to improve immersion effect of the thermoplastic composite material and investigate their mechanical properties. The results, show that the immersion effect of the composite material manufactured using commingled yarn can be improved. The tensile strength and impact energy of the thermoplastic composite material increased with increasing treatment temperature in lower the treatment temperature region, decreased with increasing treatment temperature in higher the treatment temperature region. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。