查詢結果分析
來源資料
相關文獻
- 線上振動診斷系統在線材精軋機運用之實例
- 電力諧波書審工作之OA化
- 三相電機設備接線方式與諧波問題之探討
- 語音壓縮標準G.723.1在C62X DSP上的設計
- An Active Comb Filter Design for Harmonic Interference Removal
- 談三繞組變壓器應用在諧波抑制上之效應
- A Wavelet-Aided Approach to Visualization of Power System Harmonic Trends
- Design and Implementation of a Singlephase Half-Bridge Switch-Mode Rectifier
- Analysis of the Torsional Vibration of An Induction Motor Supplied by Distorted Voltage Sources
- 熱軋機座維修
頁籤選單縮合
題 名 | 線上振動診斷系統在線材精軋機運用之實例=The Application and Case Study of On-Line Vibration Monitoring and Diagnostic System at No Twist Mill |
---|---|
作 者 | 陳昇峰; 黃志昌; | 書刊名 | 技術與訓練 |
卷 期 | 22:1=182 1997.02[民86.02] |
頁 次 | 頁84-95 |
分類號 | 472.34 |
關鍵詞 | 精軋機; 諧波; 嚙合頻率; 傍波; No twist mill; Harmonic; Tooth meshing frequency; Side band; |
語 文 | 中文(Chinese) |
中文摘要 | 線材精軋機由一部8000HP馬達傳動左右各5座共10座串聯之軋延機是線材軋延 設備的心臟。由於軋延速度最高可達100m╱sec(轉速12000RPM),且內部 元件精密度高,因此為掌握該設備之狀況防止重大事故之發生,而於84年初W68介紹引 進一套線上監診系統。本文就此軋延機的構造,監控系統的硬體架構與軟體功能、診斷法則 及使用的經驗做一簡單介紹。 |
英文摘要 | The No-Twist mill, composed of 10 stands and driven by a 8000HP motor, is the most important rolling equipment at Bar mill. The maximum rolling speed could be as high as 100m/sec(12000RPM). The accuracy of each component is highly demanding. Therefore, in order to control the condition of the equipment and prevent catastrophic shut down, the on-line monitoring and diagnostic system has been introduced by W68 since the beginning of 1995. This artiche describes the composition of the No-Twist mill, the structure of the hardware as well as the function of the software, rules of diagnosis and the experiences of using this system. |
本系統中英文摘要資訊取自各篇刊載內容。