頁籤選單縮合
題名 | 1,3-丁二烯、丙烯腈及苯乙烯熱脫附採樣分析技術研發=Development of a Thermal Desorption Method for 1,3-Butadiene, Acrylonitrile and Styrene |
---|---|
作者 | 吳麗珠; 汪禧年; 石東生; | 書刊名 | 勞工安全衛生研究季刊 |
卷期 | 5:1 1997.03[民86.03] |
頁次 | 頁27-40 |
分類號 | 412.78 |
關鍵詞 | 熱脫附; 吸附劑採樣管; 1,3-丁二烯; 丙烯腈; 苯乙烯; Thermal desorption; Solid sorbent; 1,3-butadiene; Acrylonitrile; Styrene; |
語文 | 中文(Chinese) |
中文摘要 | 1,3-丁二烯(1,3-butadiene)、丙烯�禲]acrylonitrile)及苯乙烯(styrene )廣泛地使用於ABS橡膠的製造,然尚未發現能同時採集此三種化合物之空氣採樣管。本研 究之目的在篩選適合之固態採樣吸附劑,以有效地吸附╱熱脫附1,3-丁二烯、丙烯�穭峟f 乙烯。本研究進行吸附劑篩選測試,添加化合物於吸附劑採樣管並經室溫靜置,比較前後之 脫附波峰面積,作為靜態測試;再比較有無氣流通過之脫附回收比,作為動態測試。篩選測 試之吸附劑包括:Tenax-TA, Porapak N, Carbosieve-S-III,Molecular Sieve 13X 、Carbopack B及Carboxen 569。結果顯示:Tenax-TA 及 Carbopack B 可吸附及脫附苯乙烯; Porapak N 及 CarbOSIEVE-S-III 可吸附丙烯�禲A 但以 Porapak N 效果較好; Carbosieve-S-III 及 Carboxen 569 可吸附 1,3- 丁二烯。二者幾無差異。採集單一化合物 建議以單床採樣管填充Tenax-TA採集苯乙烯,Porapak N採集丙烯�禲ACarbosieve-S-III採 集1,3-丁二烯。欲同步採集分析此三種化合物,可採用 Tenax-TA 及 Carbosieve-S-III 填 充之二重床採樣管。本採樣分析方法適用濃度範圍約每支採樣管 0.2-20 μ g。 |
英文摘要 | 1,3-butadiene, acrylonitrile and styrene are widely used in resin synthesis. However, there is no simultaneous air sampling tube for these three compounds. The aim of this study was to screen suitable thermal desorption solid sorebents for 1,3-butadiene, acrylonitrile and styrene. Several sorbents such as Tenax-TA, Porapak N, Carbosieve-S-III, Molecular Sieve 13X, Carbopack B and Carboxen 569 were screened. Analytes were directly spiked onto sorbent tubes for static and dynamic tests. From screening tests, Tenax-TA and Carbopack B were found capable of absorbing and desorbing styrene. Porakpak N and Carbosieve-S-III were able to absorb acrylonitrile, however, Porapak N was superior. Carbosieve-S-III and Carboxen 569 were equally capable of absorbing 1,3-butadiene. Single-bed sorbent tube is recommended for single compound air sampling. Tenax-TA sorbent tube is suitable for styrene sampling, Porapak N for acrylonitrile and Carbosieve-S-III for 1,3-butadiene. For simultaneous sampling of 1.3-butadiene, acrylonitrile and styrene, a multi-bed sampler packed with 100 mg Tenax-TA and 200 mg Carbosieve-S-III should be sed. The applicable range of this method is about 0.2-20 μ g analyteper sample. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。