頁籤選單縮合
| 題 名 | CO[feaf]/MAG 焊機的PWM控制技術=Control Technique of CO[feaf]/MAG Welding Machine |
|---|---|
| 作 者 | 鄭大森; | 書刊名 | 電力電子技術 |
| 卷 期 | 31 1996.02[民85.02] |
| 頁 次 | 頁56-64 |
| 分類號 | 448.532 |
| 關鍵詞 | 相移式零電壓切換; 鋸齒波; 工作週期; 短路防止時間; 相位差; Phase-shift zero voltage switching; Ramp; Duty cycle; Dead time; Phase delay; |
| 語 文 | 中文(Chinese) |
| 中文摘要 | 本文提出一種相移式PWM電路應用在CO��/MAG焊機控制電路中。電路 的設計技巧是利用硬體電路來組成相移式脈寬調變,這種電路結構藉由變壓器一 次側的漏電感和功率晶體上的輸出電容來使得四個切換開關達到詣振切換。零電 壓切換的操作方式是為了降低元件的切換損失和開關應力,以及消除不必要的緩 衝電路,而且具有較高的功率密度與轉換效率,使得切換頻率可以提高。文章中 並使用Pspice6.2來模擬與驗證設計觀念,而實際電路的量測結果證實其可行性。 |
| 英文摘要 | This paper proposes a phase-shifted pulse-width-modulated(PS-PWM) employing control circuit of CO��/MAG welding machine. This topology permits all switchingdevices to operate under zero-voltage-switching(ZVS) by using circuit parasitics suchas leakage inductance and power FET junction capacitance to achieve resonant switching. The ZVS allows operation with much reduced switching losses and stresses, andeliminates th need for primary snubbers. It enables high switching frequency operationfor inproved power density with good conversion efficiency. In this article, we used topspice6.2 to simulate the PWM circuit and verify the design concept. The usefulnessof the proposed control algorithum is confirmed by experimental results. |
本系統中英文摘要資訊取自各篇刊載內容。