查詢結果分析
相關文獻
- 聚胺基甲酸酯塗料添加催化劑對促進硬化之效應(2)--聚胺基甲酸酯樹脂之膠化性試驗
- 多元醇液化竹材與異氰酸酯所製備聚胺基甲酸酯樹脂之膠化時間及木材膠合強度
- Beckmann Rearrangement of Cyclohexanone Oxime over Borate-Pillared LDHs
- PU催化劑對PU-NC Semi-IPNs木器塗料性質之影響
- 氯苯氣相水解制苯酚LaCu/CaSAPO-5催化劑的研究
- 稀土--氧化碳助燃劑在FCC催化劑再生過程中的應用
- 有關催化劑的一些迷思概念
- 利用作用機制來快速篩選生物催化劑之研究
- 光催化劑在纖維上的應用
- 高中化學教材研究專題五--有關催化劑的一些迷思概念
頁籤選單縮合
| 題 名 | 聚胺基甲酸酯塗料添加催化劑對促進硬化之效應(2)--聚胺基甲酸酯樹脂之膠化性試驗 |
|---|---|
| 作 者 | 余啟瑞; 劉正字; | 書刊名 | 林產工業 |
| 卷 期 | 14:2 1995.06[民84.06] |
| 頁 次 | 頁87-101 |
| 分類號 | 467.4 |
| 關鍵詞 | 聚胺基甲酸酯樹脂; 膠化時間; 催化劑; Polyurethane resins; Gelation time; Catalyst; |
| 語 文 | 中文(Chinese) |
| 中文摘要 | 本研究乃探討不同合成條件之聚酯多元醇與不同種類聚異氰酸鹽所調配之聚胺基甲酸酯樹脂在各不同種類之金屬鹽類及胺類催化劑作用下之膠化性。所得重要結果可歸納如下:三乙胺及N, N, N', N'-四甲基乙二胺對含芳香族異氰酸鹽之聚胺基甲酸酯樹脂之催化效果較佳;環烷酸鈷、氯化亞錫、氯化錫則對含脂肪族異氫酸鹽者之催化效果較佳。減少催化劑添加量,可延長大多數聚胺基甲酸酯樹脂之膠化時間。聚胺基甲酸酯樹脂之NCO/(OH + COOH)莫耳比與膠化時間之關係不明顯。對芳香族異氰酸鹽而言,若聚酯之酸價較大,則其聚胺基甲酸酯樹脂之膠化時間較短。 |
| 英文摘要 | The study investigated the effect of different kinds of catalysts added on the gelation properties of polyurethane resins made from various polyols and polyisocyanates. The results obtained were as follows: Triethylamine and N, N, N', N'-tetramethyl-ethylene diamine were effective on accelerating the curing rate of polyurethane resins with aromatic isocyanates, and cobalt naphthenate, stannous chloride and stannic chloride were effective for aliphatic isocyanates. Decreasing the amount of catalysts added prolongs their gelation time. The relationship between NCO/(OH + COOH) molar ratio and gelation time was not significant. For polyurethane resins with aromatic isocyanates, the higher acid value of polyols the shorter gelation time was. |
本系統中英文摘要資訊取自各篇刊載內容。