查詢結果分析
來源資料
相關文獻
- 二維翼空蝕初始之研究
- 翼端渦漩空蝕初始之研究
- 地貌型瞬時單位歷線之通式演繹及其應用
- 基因演算法於二維翼形逆向設計之應用
- 河川網路寬度函數之碎形簡化研究及其於降雨-逕流歷程之應用
- 廣義泰勒延散理論應用於延散係數之推估
- An Inverse Design Method of Two-Dimensional Airfoil in Inviscid Flow with Ground Effect
- Application of the Panel Method to the Design of Two Dimensional Foil Sections
- 螺槳常用翼形之二維翼斷面初始空蝕性能之研究
- 風機葉片二維翼型氣動力最佳化分析與性能改進
頁籤選單縮合
題名 | 二維翼空蝕初始之研究 |
---|---|
作者姓名(中文) | 蔡進發; 吳聰能; | 書刊名 | 國立臺灣大學工程學刊 |
卷期 | 65 1995.10[民84.10] |
頁次 | 頁55-68 |
分類號 | 447.63 |
關鍵詞 | 二維翼; 空蝕初始; 尺度效應; Two dimensional foil; Cavitation inception; Scale effect; |
語文 | 中文(Chinese) |
中文摘要 | 本文選定三個典型二維翼:一是NACA0012為一一對稱翼、二是 NACA4412為一有弦拱 (Camber)的標準翼、三是NACA66α=0.8meanline是螺槳常 用的翼型,從事空蝕初始實驗。由實驗結果發現在小攻角時。空蝕型態為游泡空 蝕 (TravellingBubble),同時空蝕初始值和翼面最低壓力係數計算值一致,沒有尺 度效應(ScaleEf比ct)。在大攻角(約大於4度)時,則空蝕型態為薄面空蝕 (Sheet Cavitation),同時有尺度效應存在。 |
英文摘要 | Three standard foil sections, a symmetric NACA 0012 foil, a cambered NACA4412 foil anda NACA a=0.8 mean line with 66 thickness distribution foil, were selected to conduct thecavitation inception test. Thecavitation type of inception is travelling bubble cavitation inwhich the angle attack of foil is smaller than or equals 4 degrees. The cavitation inceptionnumber is equal to the minus of minimum pressure coefficient at the foil's surface and scaleeffect doesn't exist. The cavitation type becomes sheet cavitation in which the angle attack offoil is larger than 4 degrees and scale effect exists. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。