查詢結果分析
來源資料
相關文獻
- 配電自動化通信協定之研究
- An Incremental Maximal Progress Protocol Verification for ECFSM-Based Protocols
- 以通信協定分析儀測試通信設備或系統間的通信協定
- 配電系統自動化之探討
- Analysis of Distribution Line Carrier Using Three-Phase Bus Admittance Matrix
- 漫談北北區處配電自動化輔助運轉系統(DAAS)建置運轉維護與應用
- 配電自動化發展與網路技術介紹
- DECT通信協定新架構測試方案之簡介
- 核電廠儀控系統智慧型感測器之研製
- Policy-based網路管理協定之探討
頁籤選單縮合
題名 | 配電自動化通信協定之研究 |
---|---|
作者姓名(中文) | 陳麒文; 盧展南; | 書刊名 | 台電工程月刊 |
卷期 | 567 1995.11[民84.11] |
頁次 | 頁91-112 |
分類號 | 448.6 |
關鍵詞 | 配電自動化; 通信協定; 配電線載波; Distribution automation; Communication protocol; Distribution power line carrier; |
語文 | 中文(Chinese) |
中文摘要 | 近年來,由於經濟快速成長,造成社會形態的變遷。用戶對高品質電力 的要求日益提升。藉著配電系統自動化來改善供電品質已成為配電系統發展的主 題。配電自動化經由監視控制與資料擷取系統(SCADA),以收集發電、變電的各 種資料,經由電腦處理後,達到其監視與遙控的功能。為便於彼此間的傳送與接 收,RTU與電腦主機間就必須訂定一套規則來共同遵守,這就是所謂的通信協定 (Protocol)。有鑒於台電目前只完成了第一期的自動化工程,對於饋線與用戶自動 化仍在規劃階段。本文參考了國內各電力公司自動化的情形,在台電現有的通信 協定上加以擴充,使其功能更加完善。文中並探討配電線載波通訊的一些通訊技 術。 |
英文摘要 | Due to rapid economy growth, the electricity users requirea higher quality of the service. In order to continue improvingthe electric power supply, many distribution automationfunctions have been suggested to solve the problems. Thedistribution automation system uses SCADA ststem to collectdata from the field and perform supervisory controls ofpertinent equipment. In order to achieve these functions, acommunication protocol needs to be specified and to befollowed by various parties involved in the system. In thispaper, based on the communication protocol currently used byTaiwan Power Company, a distribution automation com-munication protocol is designed to extend the distributionautomation functions covering feeder automation and loadmanagement. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。