查詢結果分析
相關文獻
- Volumertic Error Models and Measurement for Three-Axis Machine
- Monitoring of Respiratory Rhythm and Oxygen Saturation in the Fingertip
- Generalized Study of Volumetric Error Analysis for NC Machine Tools and CMMs Part One--Mathematical Model
- Generalized Study of Volumetric Error Analysis for NC Machine Tools and CMMs Part Two--Applications
- 數控工具機與三次元座標量測儀之體積誤差分析
- 應用經驗模態與希爾伯特黃轉換探討耳脈搏訊號與心電圖訊息之比較
- 實驗室定量瓶之校正程序及校正結果量測不確定度評估
- 使用電腦斷層掃描影像量測移植活體肝臟重量之方法
- 線上彩色共焦精密顯微形貌掃描量測系統之發展
- 控制體積模式應用於地下捷運公館站避難時間之評估
頁籤選單縮合
| 題 名 | Volumertic Error Models and Measurement for Three-Axis Machine=三軸機器體積誤差模式與量測 |
|---|---|
| 作 者 | 林彥正; 羅司欣; | 書刊名 | 大同學報 |
| 卷 期 | 24 1994.11[民83.11] |
| 頁 次 | 頁259-270 |
| 分類號 | 446.8401 |
| 關鍵詞 | 三軸機器; 體積; 誤差模式; 量測; |
| 語 文 | 英文(English) |
| 中文摘要 | 我們建立和比較三軸機器之"連桿和接頭"及"量測軸"體積誤差模式。發現"連桿和 接頭 " 模式比 " 量測軸 " 模式多了垂直及連桿誤差。 為了量測 " 連桿和接頭 " 模式, 提出以此兩種模式相關性為基準之混合式方法。實驗結果顯示,此方法能折衷直接量測參數 和參考件間接量測方法之預測特性。 |
| 英文摘要 | Volumetric error models for three-axis machine based on the "link and joint" and "measured axis" are established and compared. It is found that the "link and joint" model has more terms in orthogonality and link errors than the "measured axis". Also, for calibrating the "link and joint" model, a mixed method, which is based on the correspondence between the "link and joint" model and "measured axis" model, has been proposed, Experimental results show that the mixed method can compromise the prediction characteristics of the direct measurement of parameters and indirect reference part calibration methods. |
本系統中英文摘要資訊取自各篇刊載內容。