頁籤選單縮合
題名 | 在臨界轉速比下螺飼機內粉粒流動之流量研究 |
---|---|
作 者 | 謝啟郎; 林俊一; 劉世賢; | 書刊名 | 技術學刊 |
卷期 | 8:4 1993.12[民82.12] |
頁次 | 頁507-510 |
分類號 | 460.02 |
關鍵詞 | 螺飼機; 流量; Screwfeeder; Flowrate; |
語文 | 中文(Chinese) |
中文摘要 | 本文報告粉粒在螺飼機內流動時,流量受到螺桿轉速及螺飼機尺寸大小的影響。實驗結果發現粉粒流量與螺桿轉速成正比。螺飼機尺寸變化的影響為:螺桿之螺距增加或螺葉外徑減小時會使流量增加,螺桿軸徑增加或螺葉厚度增加會使流量減小。螺桿轉速與螺飼機尺寸對流量的影響,可以下式表示:Q = KN [ ( D12-D22 ) L- ( D32-D22 ) T] |
英文摘要 | Experimental results on the flowrate of powder material in a laboratory scale screwfeeder were reported. The flow rate was determined to be proportional to the rotational speed of the screw. The flowrate was increased as the pitch of the screw was increased or the diameter of the flight was reduced. The flowrate might be reduced by increasing the shaft diameter or increasing the thickness of flight. The influence of the rotational speed and the dimensions of the screw can be expressed by the following equation: Q = KN [ ( D12-D22 ) L- ( D32-D22 ) T] |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。