查詢結果分析
來源資料
頁籤選單縮合
題名 | 軟氮化熱處理之流體化氣體之評估 |
---|---|
作者 | 陳繁雄; 林于超; 葉銘琪; | 書刊名 | 材料科學 |
卷期 | 25:4 1993.12[民82.12] |
頁次 | 頁304-308 |
分類號 | 472.3 |
關鍵詞 | 流體床熱處理爐; 軟氮化處理; Fluidized bed furnace; Nitrocarburizing; |
語文 | 中文(Chinese) |
中文摘要 | 本研究係以流體床熱處理爐,採如下三種不同之爐氣實施鋼料之軟氮化 處理: 1.N��+NH��+C�蚜�� 2.N��+NH��+ENDO.GAS 3.N��+NH��+CO�砟T種不同組合的氣體,各以不同的混合比,通入流體床中以 鋼料在軟氮化溫度範圍實施不同時間之處理後,檢測化合物層之厚度、金相組 織、硬度分佈,找出最佳之處理條件,而處理之成本分析亦將於本研究中加以探 討。 |
英文摘要 | This research is to find out the optimal nitrocarburizing process experimentally by using different contents and ratios of atmospheres in a fluidized bed furnace through some prescribed treating conditions. The evaluations of test specimens were based on some aspects such as hardness distribution, compound layer depth, diffusion depth and microstructure. Furthermore, the cost analysis of the pro-cesses were also be done in this research. The following gas compositions with different ratios were performed in the experiments: 1. N��+NH��+C�蚜�� 2. N��+NH��+ENDO. GAS 3. N��+NH��+CO�� |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。