查詢結果分析
相關文獻
- 二維應變路徑金屬材料應力應變行為研究
- 利用密度泛函理論探討能源相關材料之性質與材料開發
- A 2-D Ray Tracing Model for the Prediction of Uhf Wave Propagation in Microcellular Environments
- 二維電子系在偏斜磁場中之傳導現象
- 改善二維圓柱尾流邊端效應之新法
- The Fabrication of High-Speed and High-Power InGaAs/GaAs Field-Effect Transistors Grown by MOCVD
- 二維沖積河流底床演變分段分離演算模式之研究
- 花東地區半寶石與金屬材料之結合應用--首飾類
- 二維與三維水理數值模式在淡水河口海域之應用與比較
- 水深平均二維明渠變量流有限元素模式之研究
頁籤選單縮合
題 名 | 二維應變路徑金屬材料應力應變行為研究 |
---|---|
作 者 | 邱永川; 葉銘泉; | 書刊名 | 技術學刊 |
卷 期 | 8:3 1993.09[民82.09] |
頁 次 | 頁301-310 |
分類號 | 445.12 |
關鍵詞 | 二維; 金屬材料; 應變路徑; |
語 文 | 中文(Chinese) |
中文摘要 | 本文討論二維應變路徑問題,討論例子主要有三大項,第一項為應變路徑為直線時,固定軸向應變改變剪應變區間。第二項為應變路徑為直線,固定應變半徑,同時改變軸向應變區及剪應變區間。第三項為應變路徑為四方型。採用理論基礎為黏塑內涵時變理論且主要是利用塑性應變增量與內涵時間增量之間比值為變數,配合拘限條件導出一個積分微分方程式,求解金屬材料承受二維應變路徑下,材料應力應變行為反應。此方法主要優點為物理意義清楚,容易了解運算程序且運算方式不需要太複雜的數學方法,只需要一些簡單代數方法且適用範圍大。利用本研究之方法,求解金屬材料承受固定預扭力下,軸向週次負載時之行為反應,所得之結果和文獻[1]之實驗結果相吻合。因此雖無實驗數據足以與本研究之結果相比較,但所得結果亦相當合理。 |
英文摘要 | In this paper, the response of metallic material was studied under the constrain of the strain path. The integral-differential constitutive equation was deriver by using the theory of viscoplasicity, and new definition of intrinsic time is used. From theoretics. The results by assuming Φ(z) was in good agreement with experimental result in literature [1]. Three cases of biaxial strain path are discussed in this paper (1) different strain ratio with constraint axial strain. (2) different strain ratio with constant equivalent strain. (3) square strain path. It is seen that reasonable results can be obtained. |
本系統中英文摘要資訊取自各篇刊載內容。