查詢結果分析
來源資料
相關文獻
- 聚苯乙烯所製免洗餐具熱安定性之探討
- 以聚苯乙烯和含羥基之苯乙烯共聚物為共膜材料製備乙基纖維素微膠囊及其制放行為研究
- 保麗龍廢棄物回收製造纖維板之研究
- 免洗餐具的誕生:醫學知識在臺灣的社會性格分析
- 對位性聚苯乙烯於電子和汽車產業之應用
- The Influence of Nonionic Surface Active Agents on the Sedimentation Volume, Redispersibility and Appearance of a Polystyrene Latex Suspension in the Presence of Electrolyte
- 塑膠原料及其製品製造業--聚苯乙烯(PS)製造業
- 對位性聚苯乙烯於電子連接器產業之應用
- Effect of Charge Groups in Polystyrene and Polyvinyl Acetate Ionomeric Blends
- 工程塑膠材料熱安定性及其再生材料的利用
頁籤選單縮合
題名 | 聚苯乙烯所製免洗餐具熱安定性之探討 |
---|---|
作者姓名(中文) | 陳昭雄; | 書刊名 | 中華民國營養學會雜誌 |
卷期 | 17:1/2 民81.05 |
頁次 | 頁81-89 |
分類號 | 412.25 |
關鍵詞 | 免洗餐具; 聚苯乙烯; 熱安定性; |
語文 | 中文(Chinese) |
中文摘要 | 將發泡型聚苯乙烯材質所製之速食麵碗及失經發泡處理之聚苯乙烯材質所製之塑膠杯等免洗餐具,放置於設定溫度為60 °C,75 °C,90 °C及105 °C的烘箱中1小時;取出經各溫度處理之免洗餐具樣品,以掃瞄式電子顯微鏡進行材質表面變化之觀察,發現在75 °C時速食麵碗的材質表面即有近50的氣室破裂,在90 °C時100的氣室完全被破壞。利用氣相層析儀對速食麵碗中殘留的氣體揮發性化合物進行定量分析時發現,隨熱處理溫度的上昇,速食麵碗釋放出的揮發性化合物的量也越多。對於聚苯乙烯所製的塑膠杯,發現在60 °C時其表面材質即出現破壞剝落的現象,隨著熱處理溫度的上昇,在90°C時即有完全剝離的碎片出現。居於食具安全之考量,此次實驗說明速食麵碗不宜用於高於75°C的溫度,聚苯乙烯的塑膠杯亦不適用於超過60 °C的溫度條件。 |
英文摘要 | Put the instant noodle bowl made of polystyrene and plastic cup made of highly impacted polystyrene into the oven at 60°C, 75°C, 90°C and 105°C seperately for 1 hour. According to the analysis of scannig electron microscop (SEM),the bubbles on the surface of bowl were destroyed 50 at 75°C and 100 at 90°C. The analysis of gas-liquid chromatography shows that the more temperature was heated, the more the volatile monomer compounds were release d. Asto the plastic cup, the surface of cup was flayed at 60°C and the phono menon of flaying was prominently at 90°C. To ensure the safety, the operating temperature of the instant noodle bowl can not be over 75°C and the operating temperature of plastic cup made of highly impacted polystyrene not over 60°C. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。