查詢結果分析
相關文獻
- 利用高頻雜訊抑制放大器消除控制系統傳輸線雜訊
- 應用於無線通訊具靜電防護之低雜訊放大器設計
- 有線電視系統用戶終端信號品質查驗工程之單一波道載波雜訊比參數量測
- Image Compression for Noise Suppression and Edge Detection
- Image Restoration Problems by Filter Banks
- Noise in Charge Couple Device
- 2.4 GHz Circular-Polarization LNA Receiving-Type and PA Transmitting-Type Active Patch Antennas for ISM Band Wireless Communications
- 應用於DCS 1800系統之低雜訊放大器設計與製作
- 工業控制器雜訊抑制
- 有線電視系統用戶終端信號品質查驗工程之單一波道載波雜訊比參數量測
頁籤選單縮合
| 題 名 | 利用高頻雜訊抑制放大器消除控制系統傳輸線雜訊 |
|---|---|
| 作 者 | 陳兩嘉; 呂文俊; | 書刊名 | 技術學刊 |
| 卷 期 | 6:1 1991.03[民80.03] |
| 頁 次 | 頁65-75 |
| 分類號 | 448.532 |
| 關鍵詞 | 抑制; 放大器; 消除; 高頻; 控制系統; 傳輸線; 雜訊; |
| 語 文 | 中文(Chinese) |
| 中文摘要 | 在微電腦自動控制系統中,信號由傳輸線傳遞於中央處理單元(CPU)和終端設備之間,由於信號頻率高及兩者間距離長,故極易引起反射雜訊,串音雜訊及共模雜訊,這些雜訊會使高靈敏度之自動控制系統發生錯誤動作,甚至損傷控制元件。本文詳細分析這些雜訊產生原因,並利用反射、串音、共模拒斥比等原理,我們研製出所謂「高頻雜訊抑制放大器」,經實驗證明此放大器改善效果極佳,能有效的解決雜訊干擾,使控制系統更臻精確完美。 |
| 英文摘要 | In microprocessor controlled automatic control systems, signals are transmitted between central processing unit (CPU) and terminal equip-ments through transmission lines. It often causes serious reflection noise, common mode noise and crosstalk noise because the transmission lines are usually too long and the signal frequency is very high. The noise can easily cause malfunctions of the control systems. In this paper, we discuss the reasons of the noise problems in the transmission lines and design a high frequency noise suppression amplifier to eliminate the above noise. In our experiments, it can eliminate these noise very effectively. |
本系統中英文摘要資訊取自各篇刊載內容。