查詢結果分析
來源資料
相關文獻
- 3D點雲之幾何公差量測技術概論
- 基於點雲之即位幾何公差量測技術
- 雷射全像作非織物厚度測試之研究
- Comma Cloud Development in a Two-Layer Baroclinic Model with Vertical Water Vapor Flux at Mid-Level
- 3D列印之手持式三維掃描器建模加速技術
- 利用多重影像產生之點雲的精度評估
- DGPS與PPP於空載光達解算定位精度成果之研究
- Extraction of Surface Features from LiDAR Point Clouds Using Incremental Segmentation Strategy
- 以色彩深度影像疊合建構室內三維環境地圖之技術
- 3D點雲人臉辨識模式比較
頁籤選單縮合
題名 | 3D點雲之幾何公差量測技術概論=Introduction to GD&T Metrology Based on 3D Point Cloud |
---|---|
作者 | 鄭雲謙; 蘇哲甫; 李炫奇; | 書刊名 | 機械工業 |
卷期 | 401 2016.08[民105.08] |
頁次 | 頁12-18 |
專輯 | 工業4.0技術專輯 |
分類號 | 440.12 |
關鍵詞 | 非接觸式量測; 幾何尺寸與公差; 點雲; Non-contact measurement; Geometric dimensioning and tolerancing; GD&T; Point cloud; |
語文 | 中文(Chinese) |