查詢結果分析
來源資料
相關文獻
- 氯化鈉吸附水分子之分子動力學模擬
- 以田口方法探討不同氯化鈉濃度切削液對JIS SUS 304不銹鋼鑽削時之刀具壽命研究
- Salt Tolerance in Seedlings of the Mangrove Kandelia Candel (L.) Druce, Rhizophoraceae
- Effect of Glucose Concentration, Agar, and Amount of Inoculum on the 6.5% Sodium Chloride Tolerance Test for Presumptive Identification of Enterococci
- 氯化鈉對六種魚類四種器官鹼性磷酸酯酶活性的影響
- 高溫配管用鉻鉬鋼於水蒸汽氣氛之氯化鈉熱腐蝕
- 310不鏽鋼於850℃含一大氣壓SO[feaf]氣氛下的融鹽熱腐蝕行為
- 氯化鈉熱腐蝕之回顧
- 氯化鈉熱腐蝕誘發之鐵錳鋁合金脫錳內氧化
- The Manufacturing of Fire-retardant Plywood and Its Fire Resistancy(Ⅱ)--Plywood Quality Determination
頁籤選單縮合
題 名 | 氯化鈉吸附水分子之分子動力學模擬=Molecular Dynamic Simulation for the Process of Water Absorbed by Sodium Chloride |
---|---|
作 者 | 魏志憲; 王中鼎; 廖杞昌; 鄭育昆; | 書刊名 | 大氣科學 |
卷 期 | 43:3 2015.09[民104.09] |
頁 次 | 頁171-195 |
分類號 | 328.25 |
關鍵詞 | 分子動力學模擬; 氯化鈉; 吸濕性; Molecular dynamic simulation; Sodium chloride; Hydroscopic; |
語 文 | 中文(Chinese) |
中文摘要 | 大氣中微粒的吸濕性成長率對於大氣輻射傳遞及氣候預報有著重要的效應,而海鹽中的氯化鈉亦為大氣奈米微粒的主要組成之一,其尺寸大多小於100奈米。由於藉實驗量測小於40奈米的微粒的吸濕性行為,需克服尺寸效應與雜質影響等問題,因此本研究嘗試以分子動力學模擬技術,初步研究探討氯化鈉吸濕性的行為。在設定合適的參數與勢能函數與力場後,依序進行三組模擬實驗。在氯化鈉引進空隙結構分析中,發現空隙愈多,固態晶體的結構愈不容易維持長程有序的現象。而在氯化鈉雙表面吸附實驗,模擬結果顯示空隙愈多,對於吸附水分子的效果愈好,說明晶體表面具有一定的空隙量將有利於溶液的吸濕性成長。最後的氯化鈉團簇吸附實驗模擬,能說明大氣中凝結核吸附水分子行為,其結果顯示當水分子質量比大於40.5%時,第一層水分子幾乎已完全包覆氯化鈉團簇,且有更多的水分子凝結在第一層水分子之上。因此藉由分子動力學模式之模擬,有助於完整描述溶液的成長過程。 |
英文摘要 | The hydroscopic growth of atmospheric particles has important consequences for the atmospheric radiative transfer of aerosols and climate prediction. Sodium chloride (NaCl) nanoparticles from sea salt comprise a major component of atmospheric aerosols. The size range below 100 nm was found to dominate sea-salt number. Experimental observations of the growth factors at sizes smaller than 40 nm are limited by difficulties in the size effect and impurity concerns. Therefore, the study examines the process that water molecular is absorbed by sodium chloride by applying molecular dynamic simulation. The crystal surface of sodium chloride is introduced defects. Three simulation experiments were carried out with setting suitable parameters of the potential function and force field. For the experiment of introducing defects on the surface of sodium chloride, the result shows that the more the introduced defect, the more difficult the solid crystal maintains the long-range orientational order. The result from the experiment simulating the double surface absorption process of sodium chloride shows that the more the defect introduced, the better the effect for adsorbing water molecules. It indicates that the absorption is evident at where the defects are introduced. The last experiment is the sodium chloride cluster adsorption simulation, which is regarded as the experiment that can describe the hydroscopic behavior of aerosols in the real atmosphere. When the mass ratio of water molecule is larger than 40.5%, the first layer of water molecules have almost completely coated sodium clusters, and more water molecules consistently condense on the first layer of water molecules. Therefore, the molecular dynamic simulation is helpful for completely examine the growth of solution. |
本系統中英文摘要資訊取自各篇刊載內容。