頁籤選單縮合
題名 | 植物組織電阻抗量測平臺調光電路設計與光照模擬控制=A Design on the Dimmable Circuit and the Control of Illuminating Intensity Simulation in an Impedance Measurement Platform for Botanical Tissue |
---|---|
作者 | 徐孟義; 吳冠德; 陳澤民; | 書刊名 | 農林學報 |
卷期 | 61:4 2012.12[民101.12] |
頁次 | 頁383-398 |
分類號 | 448.42 |
關鍵詞 | 調光電路; 日照模擬; 日光燈; 非侵入式; 植物阻抗量測; Dimmer circuit; Illumination simulation; Fluorescent lamp; Non-invasive; Botanical impedance measurement; |
語文 | 中文(Chinese) |
中文摘要 | 本研究之目的在為植物電阻抗量測平台建置具模擬日照功能之無段式光照系統,希望透過光照量與溫濕度等環境因素的同步調控使非侵入式植物阻抗的量測更具生理意義並成為指標參數。 相關研究指出不同之光波長對植物生理有不同之影響,在植物行光合作用之時,不同之光波長將產生著不同之光合產物,因此植物須在全光譜光線下才能正常成長;基於全光譜考量本研究不採用單光譜之LED燈而採用螢光燈調光方式做為光環境光源。本研究由收集日照變化之照度值開始,將溫室中所收集到之照度值變化數據做為量測平台日照模擬的依據;同時亦分析比較一般家用日光燈與3波長燈管光譜以及調幅、調相、調頻等調光電路。由於本研究須以負載功率為主要因素,因此採用調幅控制;另外為控制照度變化,本研究特地開發出DAQ轉換電路並且製作成PCB電路板以利於電腦與量測平台進行溝通。回授控制之設計則以放置太陽能板監測,以回應光照值控制,依據太陽能板之光電效應即可精準量測照度值;而軟體介面則使用LabVIEW圖控軟體撰寫日照模擬及定光照之程式,最後並將光照控制之軟硬體模組,整合入非侵入式阻抗量測之軟硬體架構中,達成本研究建置完整生物組抗量測平台之目標。 |
英文摘要 | This research establishes illumination simulation system for the non-invasive botanical impedance measurement platform. A developed dimmable circuit and the rearrangement of fluorescent trigger circuit in the platform linked together consist of this illumination simulation system. Integrating with the control on temperature and humidity, the expected environmental conditions including the sunshine illumination, temperature and humidity for botanic physiology measurement can be implemented. Many literatures confirm that various wavelengths of light will resulted in different responses on the physiology of a plant. The products from photosynthesis processes in a plant vary with segments of light spectrum absorbed. Therefore, a sturdy plant must grow with full spectrum of illumination. Since the popular and energy-saving illumination source-LED is with single specific wavelength and is unable to satisfy the full spectrum requirement for the photosynthesis processes, this approach chooses dimming fluorescent light source as illumination device. For illumination simulation, the illumination values in a greenhouse are the specification of the developed system. For realization, the dimming light circuit adjusts the amplitude, the angle, and the frequency etc. as illumination control. In this research it is verified that the dominant factor for illumination control is the load power, thus the dimming light system developed will be accomplished by implementing the amplitude adjustment. A solar panel was installed in the platform and used as the sensor of illumination feedback control. In addition, a friendly interface developed by LabVIEW programming is employed with the hardware NI PXI system and the PCB layout board of the developed integrating circuit to facilitate and accomplish the non-invasive impedance measurement system with illumination, temperature and humidity control. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。