查詢結果分析
來源資料
相關文獻
- 複合紡絲技術對於抗靜電纖維假撚加工之影響探討
- The Preparation and Property Study on Metallized Nylon4 Films
- 金屬材料塗佈織物抗靜電之研究
- 假撚加工絲之熱轉移及一些加強的方法
- 半導體標準--表面電阻標準之建立
- Novel Method to Prepare Conductive Coatings from Metal Chelate of Polyester
- 從熱應力特性來觀察延伸假撚加工--有關機械與纖維之接觸點方面
- Studies on the Preparation and Properties of Conductive Nylon6 Films
- 高分子界面劑之界面現象及原理--SEBS-Poly(oxyethylene)共聚物的合成、特性和界面行為
- 假撚加工線上偵測裝置之發展及應用
頁籤選單縮合
題名 | 複合紡絲技術對於抗靜電纖維假撚加工之影響探討=The Effect of Antistatic Fiber of Draw Texturing Yarn by Conjugate Spinning |
---|---|
作者姓名(中文) | 黃坤山; 蔡筱蘄; | 書刊名 | 紡織綜合研究期刊 |
卷期 | 24:4 2014.10[民103.10] |
頁次 | 頁8-13 |
分類號 | 478.1 |
關鍵詞 | 抗靜電纖維; 假撚加工; 表面電阻; Anti-static fiber; Draw texturing yarn; Surface electric resistance; |
語文 | 中文(Chinese) |
中文摘要 | 利用導電性碳黑與高分子進行摻合,可用於紡製具有導電之纖維,能做為耐水洗之抗靜電纖維,同時還具有不受環境溼度影響之優點,在極低溫度環境中仍能具有優良的抗靜電效果。本研究採用奈米導電性碳粉與聚酯材料進行共混,並利用複合纖維紡絲技術生產不同結構比例之複合纖維,探討分析奈米導電性碳粉對於抗靜電纖維強伸度,以及比電阻之影響。研究結果顯示,複合紡絲技術能用於調整控制纖維的強伸度與比電阻,當纖維的拉伸強度隨著導電性機能粉體的增加而提高時,卻會造成纖維的伸長率下降。另一方面,假撚延伸加工的過程中,纖維的比電阻會因為延伸與表面磨損而導致纖維的比電阻下降,因此有效的提高導電性機能粉體的區域將有利於纖維的假撚延伸加工。 |
英文摘要 | Conjugate spinning technology can be used to adjust the control strength and elongation of the fibers and the specific resistance. The tensile strength of fiber increases as the powder is increased, but it would cause the fiber elongation decreased. On the other hand, the specific resistance of the fiber would decreases due extension and surface wear. Thus increasing the content of the powder will be beneficial to extend the fiber false twist processing. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。