查詢結果分析
相關文獻
- 考慮應變硬化的桁架結構之主對偶連續式極限分析
- 基於MATLAB主對偶法的混合式硬化桁架連續式極限分析
- 都市計畫草圖替選方案分析模式之實例研究
- Minimum AFI for CSP-1 Plan Based on Fuzzy Optimization
- On the Convergence of a General Algorithm for Limit Analysis Involving Rate-Sensitive Materials
- 以配銷需求規劃(DRP)為核心之配銷管理模式
- 臺灣地區花卉最適運銷量之決定:兼論採行遠端拍賣之可行性
- TMCP製程鋼及銲件之高溫特性
- 鋁合金之軸對稱擠製分析
- Bayesian Average Outgoing Quality Limit Sampling Plans Based on Fuzzy Optimization
頁籤選單縮合
題名 | 考慮應變硬化的桁架結構之主對偶連續式極限分析=Sequential Limit Analysis of Strain-Hardening Trusses Based on a Primal-dual Method |
---|---|
作者姓名(中文) | 呂學育; 李嶸杉; 林彥均; | 書刊名 | 中華科技大學學報 |
卷期 | 51 2012.04[民101.04] |
頁次 | 頁137-148 |
分類號 | 441.1 |
關鍵詞 | 極限分析; 應變硬化; 主對偶法; 數學規劃; Limit analysis; Strain hardening; Primal-dual method; Mathematical programming; |
語文 | 中文(Chinese) |
中文摘要 | 本文旨在利用基於主對偶法的連續式極限分析,探討考慮應變硬化性質的結構承載能力。極限分析基於下限或上限定理以直接估算結構的塑性反應,可作為結構設計及安全評估。另一方面,連續式極限分析藉由降伏強度及結構變形幾何的漸次迭代更新,可視為古典極限分析之延伸,已被廣泛地驗證為一精確及具效率的大變形分析工具。此外,下限與上限問題陳述的對偶性質,可應用於極限分析的數值計算,不僅同時計算上限及下限解,也可迅速收斂得到主對偶之最佳解。文中以桁架結構為數值案例,其為一古典之極限分析問題,惟當考慮具有應變硬化性質,則下限法或上限法無法直接應用於問題之求解,此時連續式極限分析將突破古典極限分析的設限,順利地求解考慮應變硬化性質的極限承載能力。文中除引用主對偶內點法進行連續式極限分析,以探討桁架結構的極限承載能力;同時基於比對驗證之目的,亦將利用有限元素法套裝軟體進行彈塑性之逐步分析。最後,本文比較極限分析之直接法與有限元素彈塑性之逐步分析的分析結果,並對基於主對偶方法的連續式極限分析作進一步探討。 |
英文摘要 | The paper is aimed to study the load bearing capacity of strain-hardening structures by using sequential limit analysis based on a primal-dual method. By sequential limit analysis, it is to conduct a sequence of limit analysis problems with updating the yield criterion and the deformed configuration. On the other hand, sequential limit analysis has been demonstrated extensively to be an accurate and efficient tool for the large deformation analysis. The duality relationship between the static and the kinematic formulations can be applied to improve the numerical investigation of limit analysis. It not only calculates the upper bound and the lower bound simultaneously but also converges rapidly to the primal-dual optimal solution. Illustrative examples are focused on truss structures. It is more appropriate to apply sequential limit analysis to investigate the strain-hardening trusses. The primal-dual interior-point algorithm provided by Matlab is incorporated with the concept of sequential limit analysis and compared to the results obtained by the elastic-plastic analysis performed by the computer code Abaqus. Finally, future work on sequential limit analysis based on the primal-dual method is discussed. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。