查詢結果分析
來源資料
頁籤選單縮合
| 題 名 | S2鋼種縮小供料尺寸製程改善=The Process Improvement of Reduce S2 Steel Supply Size |
|---|---|
| 作 者 | 郭家閔; 梁聖樂; 林宜穎; | 書刊名 | 鑛冶 |
| 卷 期 | 58:1=225 2014.03[民103.03] |
| 頁 次 | 頁103-110 |
| 分類號 | 454.8 |
| 關鍵詞 | 中鋼線材二場; S2鋼種; CSC #2 rod mill; S2 steel; |
| 語 文 | 中文(Chinese) |
| 中文摘要 | 早期製作氣動起子頭所需的盤元都是由歐洲及日本進口,其售價高昂且料源供應不穩定,中鋼為協助國內手工具製造業者降低成本、提升國際競爭力,於民國85年成功開發S2鋼種,以及陸續研發更高品級的S2-1M2與S2-1M3鋼種,協助國內氣動工具製造業者不斷往高品級、高附加價值方向邁進,但盤元最小線徑尺寸仍在8mm以上,需要經過多次抽線與球化等加工程序後才能製作成品。為滿足客戶需求,中鋼線材二場於民國99年開始試俥生產,其新穎的設備具有低溫控制軋延,且擁有更優異的冷卻控制能力,終能生產5.5~7mm之小尺寸S2鋼種,可協助下游客戶節省部分抽線及球化退火加工製程、縮短交期、降低成本、穩定品質、節能減碳,促進下游客戶擠身於世界一流手工具製造業的行列,提升產品附加價值與國際競爭力。 |
| 英文摘要 | In the past, the coil that to be produced into bit is imported from Europe and Japan. The price is very expensive and unstable supply. In order to help the domestic hand tool manufacturers to cost down and improve international competitiveness, CSC developed S2 steel in 1996, and gradually developed a higher grade S2-1M2 and S2-1M3 steel. But the rod size is still 8mm above. It needs to go through several drawn, spheroidizing annealing and other processing procedures before making the finished product.To meet customer demand, the CSC Rod 2 Mill began commissioning in 2010. The rod could be rolled with low temperature controlled rolling. Finally be able to produce 5.5~7mm small size S2 steel. Customers could reduce several drawn, spheroidizing annealing and other processing process. To shorten delivery time, cost down, stable quality, energy conservation & carbon reduction. |
本系統中英文摘要資訊取自各篇刊載內容。