查詢結果分析
來源資料
相關文獻
- 大型貨櫃船結構動態負荷分析
- 有限元素法在塔式起重機結構強度之分析
- 工具機立柱結構分析與設計最佳化:利用有限元素法
- 有限元素法與邊界元素法在結構分析上的應用
- 船體負荷計算與結構分析的整合以及穿浪型雙體船全船結構分析
- FRP遊艇於船架支撐下之變形分析
- 應用有限元素法於自動平板夾鉗之結構分析
- 邊界元素法於鋪面之結構分析
- Numerical Design-change Strategy on Strength Assessment to the Construction Formwork Made of Recycled Plastic
- Modified Finite Element Solutions for Planar Entry Flow of an Oldroyd-B Fluid
頁籤選單縮合
題名 | 大型貨櫃船結構動態負荷分析=Dynamic Loadings for Structural Analysis of a Large Container Ship |
---|---|
作者 | 方志中; 吳華桐; Fang, C. C.; Wu, H. T.; |
期刊 | 中國造船暨輪機工程學刊 |
出版日期 | 20130500 |
卷期 | 32:2 2013.05[民102.05] |
頁次 | 頁91-97 |
分類號 | 444.52 |
語文 | chi |
關鍵詞 | 貨櫃船; 三維小板法; 船舶運動; 波浪負荷; 有限元素法; 結構分析; Container ship; Oblique waves; Ship motion; Wave loads; Structural analysis; Finite element method; 3D green function method; |
中文摘要 | 本文結合三維船舶運動理論與船體有限元素結構直接分析,對一艘大型貨櫃船進行數值計算並研究其在波浪中船舶運動及船體波浪負荷特性。運動及負荷的數值計算包含二維截片法(strip method)及三維小板法(HSC-3D),其中三維小板法包括三維振盪源流(3D pulsating source, 3DP)及三維前進-振盪源流(3D translating-pulsating source, 3DT)兩種不同的三維源流分布模式計算並比較其在波形及流體動壓力之差異。藉由本研究發展之流固界面轉換程式,在靜水面下之浸水部位船殼局部動態壓力負荷可順利轉換至船體結構之有限元素分析模型,以進行船體結構在波浪中的受力反應分析。對於有限元素結構分析模型之水動力負荷與船體運動慣性力合力之差異,已在本文中討論,理論而言,三維前進-震盪(3DT)模式充分考慮船舶前進速度的效應,是較為接近實際物理現象的理論模式。同時,對於不同源流分布模式(3DP, 3DT)計算的負荷對貨櫃船結構分析所造成的船體結構反應差異進行探討。 |
英文摘要 | This paper demonstrates the results on the combination of 3D ship motion and wave loads program (HSC-3D) with finite element strength analysis of ship hull structures. The ship motion responses and wave loads of a large container ship in oblique waves have been calculated and compared by using three computer programs which are based on 2D strip method, 3D pulsating source distribution technique (3DP) and 3D translating-pulsating source distribution technique (3DT) respectively. An interface program has been developed to transfer the hydrodynamic pressures obtained from 3D Green function method to structural finite element model. Based on the linearised theory, this interface program transfers the hydrodynamic pressures on the wetted hull surface to the finite element model and converts to the nodal forces smoothly. The discrepancies between the total resultant hydrodynamic forces and inertia forces for the large container ship in waves have been discussed. Some comparison results and examples of structural analysis based on the hydrodynamic pressures calculated by 3DP and 3DT techniques have been shown and discussed in this study. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。