查詢結果分析
相關文獻
- Prediction of Cutting Temperatures in Turning Carbon-Fiber-Reinforce-Plastics Materials Using Chamfered Main Cutting Edge Sharp Tools Considering Wear
- 應用於模具製造之脈衝雷射複合微切削加工
- Machining Parameters Selection for Stock Removal Turning in Process Plans Using a Float Encoding Genetic Algorithm
- 以有限元素分析法研究頦帽對下顎前突症之下顎骨型態變化
- 增進重力沉降室效率之方法研究
- 平行三孔隧道開挖之三維度有限元素分析
- 應用表面反應法於車削時和刀具限制接觸長度對切屑曲率半徑影響之研究
- 非接觸式精密刀具定位系統之研製
- 重力沉降式集塵設備之流場模擬
- 纖維強化複合材料損傷分析
頁籤選單縮合
| 題 名 | Prediction of Cutting Temperatures in Turning Carbon-Fiber-Reinforce-Plastics Materials Using Chamfered Main Cutting Edge Sharp Tools Considering Wear=磨耗尖鼻負稜碳化鎢車刀削碳纖複合材料(CFRP)之溫度預測研究 |
|---|---|
| 作 者 | 張充鑫; 陳正虎; | 書刊名 | 宜蘭大學工程學刊 |
| 卷 期 | 8 2012.12[民101.12] |
| 頁 次 | 頁78-89 |
| 分類號 | 446.893 |
| 關鍵詞 | 車削; 切削溫度; 碳纖複材; 有限元素分析; Turning; Cutting temperatures; CFRP; FEA; |
| 語 文 | 英文(English) |
| 中文摘要 | 本研究是一種選用K型材質的尖鼻負稜主刃碳化鎢車刀片,當刀尖在工具磨床上預先磨有一磨耗量後,針對碳纖維複合材料(CFRP)做車削研究。研究當中除了量測三軸切削力外,並利用切削過程中,刀面與工件之摩擦面積,以計算出摩擦力。其次配合有限元素分析技術(FEA),利用Abqus™軟體及逆向分析法(Inverse method),以預測磨耗尖鼻負稜碳化鎢車刀切削碳纖複材時其刀尖之表面溫度。最後與美工外線儀器所量測的結果作比較,結果顯示量測值與預測值很接近。 |
| 英文摘要 | Temperatures of the carbide tip's surface when turning Carbon-Fiber-Reinforced-Plastics (CFRP) materials with a K type sharp main cutting edge tool considered wear is investigated. The frictional forces and heat generated in the basic cutting tools are calculated by using the measured cutting forces and the theoretical cutting analysis. The heat partition factor between the tip and chip is solved by using the inverse heat transfer analysis, which utilizes temperature on the carbide tip's surface measured by infrared as the input. The carbide tip's surface temperature is determined by finite element analysis (FEA, Abaqus™ software) and compared with temperatures obtained from experimental measurements by infrared. Good agreement demonstrates the proposed model. |
本系統中英文摘要資訊取自各篇刊載內容。