查詢結果分析
來源資料
相關文獻
- 利用電漿蝕刻表面羧基形成粗糙次結構之金鍍膜表面增強拉曼散射聚苯乙烯奈米粒子陣列
- 以聚苯乙烯和含羥基之苯乙烯共聚物為共膜材料製備乙基纖維素微膠囊及其制放行為研究
- 羧基偶氮染料之合成研究
- 羧基偶氮染料對聚酯、羊毛及聚酯/羊毛混紡織物之染色性研究
- 保麗龍廢棄物回收製造纖維板之研究
- 對位性聚苯乙烯於電子和汽車產業之應用
- The Influence of Nonionic Surface Active Agents on the Sedimentation Volume, Redispersibility and Appearance of a Polystyrene Latex Suspension in the Presence of Electrolyte
- 半導體電漿蝕刻設備介紹
- 塑膠原料及其製品製造業--聚苯乙烯(PS)製造業
- 對位性聚苯乙烯於電子連接器產業之應用
頁籤選單縮合
題名 | 利用電漿蝕刻表面羧基形成粗糙次結構之金鍍膜表面增強拉曼散射聚苯乙烯奈米粒子陣列=Gold-Shelled SERS-active Polystyrene Nanoparticle Array with Nanocorrugations via Surface-Carboxylation-Shielded Anisotropic Plasma Etching |
---|---|
作者姓名(中文) | 謝馨儀; 黃祖緯; 王本誠; 曾繁根; | 書刊名 | 光學工程 |
卷期 | 118 2012.06[民101.06] |
頁次 | 頁27-32 |
分類號 | 448.59 |
關鍵詞 | 表面增強拉曼散射; 聚苯乙烯; 羧基; 電漿蝕刻; SERS; Polystyrene; Carboxyl groups; Plasma etching; |
語文 | 中文(Chinese) |
中文摘要 | 本文介紹一種電漿蝕刻聚苯乙烯(polystyrene)奈米粒子以形成高深寬比粗糙次結構的方法,快速地製作具有高效能增強條數之表面增強拉曼散射奈米粒子陣列於玻璃基板上。此金鍍膜粗糙奈米粒子陣列將可提供待測分子約10^(5-6)倍平均拉曼散射強度。若比較粗糙表面與平滑表面的金鍍膜奈米粒子,則粗糙處理後的增強能力為平滑表面的12倍。文中亦針對粗糙化成因作定性與定量的分析,歸納出羧基扮演了奈米遮罩的功能,造成電漿轟擊下選擇性蝕刻的粗糙化效果。 |
英文摘要 | This paper introduces a facile plasma etching approach to treat polystyrene nanoparticle array with high-aspect-ratio nanocorrugations for high efficient surface enhanced Raman scattering (SERS) applications on glass substrate. After gold coating onto corrugated nanoparticle array, it will provide up to 10^(5-6) times Raman scattering intensity of sample molecule in average. When the rough surface compares with smooth surface on gold-coated nanoparticles, the roughness treatment improves the enhancement ability to 12 folds than that on the smooth surface. By the qualitative and quantitative analysis, the mechanism of surface corrugation formation is suggested that the carboxyl groups play the role of nanomasks to resist plasma ion bombardment, leading to the roughness effect after selectively etching. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。