查詢結果分析
相關文獻
- Study on Pyrolysis Reactor Development and Its Fast Pyrolysis Process in Converting Biomass into Bio-oil
- 全國大學院校機械學門之評鑑
- 各大學機械工程相關研究所博碩士論文題目
- Comparison of the Iterative Methods for the Four-level V-cycle Multigrid Method and α-Preconditioning Conjugate Gradient Method on the Driven-cavity Problem
- 大學機械工程教育創造發明之規劃
- 機械工程人員對機械製造技術應有認識之分析
- 雲嘉南地區專科機械人才需求與教學之配合
- The Problem-Solving Approach for the Fundamental Hands-On Practice Courses in Mechanical Engineering Education
- 重現古代機械的輝煌
- 機械工程教育之展望
頁籤選單縮合
| 題 名 | Study on Pyrolysis Reactor Development and Its Fast Pyrolysis Process in Converting Biomass into Bio-oil=快速熱解生質原料轉成生質油之設備開發及熱解製程研究 |
|---|---|
| 作 者 | 陳延昌; 潘永寧; 謝國煌; | 書刊名 | 中國機械工程學刊 |
| 卷 期 | 32:3 2011.06[民100.06] |
| 頁 次 | 頁219-225 |
| 分類號 | 446.8 |
| 關鍵詞 | 快速熱解生質原料; 生質油; 機械工程; Fast pyrolysis process; Biomass; Bio-oil; Screw extruder; |
| 語 文 | 英文(English) |
| 中文摘要 | 本研究開發一創新快速熱解生質原料轉成生質油之雛型機,系統中包含單擠壓推拔型導螺桿,利用變頻器控制馬達轉速,再搭配鏈條傳動導螺桿,以輸送生質原料並同時進行熱解。本裝置簡單、效率高、廉價且易放大。另外,以樟樹作為生質原料進行本裝置之初步測試,實驗結果得知,欲獲得最高生質油產率時,對於粒徑小於0.85mm之生質原料,最佳之擠壓螺桿轉速為20rpm,熱解溫度為470℃;又,當粒徑為0.85mm~1.18mm時,最佳之擠壓螺桿轉速為20rpm,熱解溫度為500℃;另,當粒徑為1.18mm~1.70mm時,最佳之擠壓螺桿轉速為40rpm,熱解溫度為500℃。 |
| 英文摘要 | A prototype fast pyrolysis reactor for converting biomass (agriculture and forestry wastes) into bio-oil has been developed in this study. In the developed system, a novel reaction chamber consisting of a single tapered screw extruder which is chain-driven by a motor with adjustable rotational speeds was designed for simultaneously feeding and pyrolyzing the biomass. This particular reactor has merits of simplicity, high processing capability, easy to scale-up and also relatively low cost. In addition, Trial runs of the developed fast pyrolysis reaction system have been conducted for camphor trees, and the results indicate that for grain size below 0.85mm, the optimal pyrolysis temperature and rotational speed to reach peak bio-oil yield are 470℃ and 20rpm, respectively, whereas 500℃ and 20rpm are for 0.85~1.18mm grain size range, and 500℃ and 40rpm are for 1.18~1.70mm grain size range. |
本系統中英文摘要資訊取自各篇刊載內容。