查詢結果分析
來源資料
相關文獻
- P2P視訊串流技術之現場延遲研究
- 應用於點對點視訊串流錯誤回復之封包遺失模型
- 聚異氰酸鹽種類對PU-NC Semi-IPNs木器塗料性質之影響
- PU催化劑對PU-NC Semi-IPNs木器塗料性質之影響
- 多羥基樹脂種類對PU-NC Semi-IPNs木器塗料性質之影響
- PU-NC Semi-IPNs木器塗料組成分之添加次序對其性質之影響
- PU-NC Semi-IPNs應用於木器塗料之研究(1)--NCO/OH莫耳比與PU/NC組成對塗料及塗膜性質之影響
- PU-NC Semi-IPNs應用於木器塗料之研究(2)--NCO/OH莫耳比與PU/NC組成對semi-IPNs塗膜性質之影響
- 瀝青膠泥化學組成對其性質影響研究
- 互穿聚合體網狀結構物在塗料上之應用
頁籤選單縮合
題名 | P2P視訊串流技術之現場延遲研究=On the Live-delay of P2P Video Streaming |
---|---|
作者姓名(中文) | 劉炳傳; 蘇奕宇; 高靖鈞; | 書刊名 | 電腦與通訊 |
卷期 | 143 2012.02[民101.02] |
頁次 | 頁96-101 |
分類號 | 448.6 |
關鍵詞 | 現場延遲; 點對點視訊串流; 網狀結構; Live-delay; P2P video streaming; Mesh-based topology; |
語文 | 中文(Chinese) |
中文摘要 | 以P2P 傳輸技術傳遞即時影音串流,一般而言將產生較大的現場延遲。這 現象尤其在採用網狀(mesh-based)結構的P2P 串流傳輸技術中更為明顯。其主要 的原因來自於P2P 串流傳輸技術比一般串流技術使用較多的資料暫存空間,以 使得客戶端間有較高的機率可進行分享。本論文主要分析P2P 串流傳輸技術在 傳輸即時影音串流的現場延遲現象,進而探討現場延遲與P2P 分享率間如何達 成平衡。同時藉由調整P2P 串流傳輸之區塊請求方法而降低P2P 串流協定控制 封包之額外傳輸成本。我們以實際實驗分析P2P 串流區塊傳輸排程演算法,實 驗結果證明在不同類型客戶端中,所提演算法皆能達到穩定的現場延遲時間,同 時達成P2P 分享效果。 |
英文摘要 | In general, using peer-to-peer transmission technology to deliver a live video will result in more live-delays. This phenomenon becomes more obvious in the case of mesh-based P2P streaming technology. The main reason comes from the P2P streaming technology to use more buffer to make the peers may have a higher chance to share with each other. This paper analyzes the reasons of causing live-delays in P2P streaming technology and provides an algorithm which can achieve a balance between live-delays and P2P sharing probability. In addition, the algorithm can also reduce control packet overheads by adjusting the number of requests of video segments. We provide an experimental result to show that our algorithm can have stable live-delays especially in heterogeneous environments and still have the effect of P2P sharing |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。