查詢結果分析
來源資料
相關文獻
- 以修正後細胞自動機方法模擬對流效應影響鋁銅合金之微觀凝固過程
- 以修正細胞自動機方法模擬鋁銅合金之微觀凝固過程
- Transient Analysis of 2-D Rectangular Fin with Constant Base Heat Flux and Tip Convective Effects
- SiC<p>/A356鋁基複合材料鑄造方法與機械性質關係之研究
- Effect of Convective Flow on the Current Efficiency of an Ion-Selective Membrane
- 潛熱釋放率對金屬凝固過程影響之有限元素分析
- 多成份鎳化鋁介金屬合金其顯微組織及孔隙缺陷於凝固過程中的演變形成機構
- Simulation of Pemfuel Cell Gas Flow Field Channel
- A Numerical Study of Natural Convection Effects on a Rotating Cylinder Heated with a Heat Source on a Fixed Location
- 空孔量及樹枝狀晶胞對A201鋁合金鑄件機械性質影響之研究
頁籤選單縮合
題名 | 以修正後細胞自動機方法模擬對流效應影響鋁銅合金之微觀凝固過程=A Modified Cellular Automaton Model for the Simulation of Convection Effects on Micro-Solidification Processes of Aluminum-Copper Alloy |
---|---|
作者 | 吳振瑋; 彭勳章; 趙隆山; 蘇正熹; | 書刊名 | 鑄造工程學刊 |
卷期 | 35:1=140 2009.03[民98.03] |
頁次 | 頁9-19 |
分類號 | 472.5 |
關鍵詞 | MAC法; 枝狀晶; 凝固過程; 對流效應; Modified cellular automaton method; Dendrites; Solidification and convection effect; |
語文 | 中文(Chinese) |
中文摘要 | 本文採用修正後自動細胞機方法(Modified cellular automaton method, MCA method)模擬流場效應對鋁銅合金凝固過程中枝狀之晶微組織的影響。本文以巨觀熱傳為基礎,結合微觀的成核、成長模式,並且在微觀濃度之計算中加入金屬液之流動,在液固相的變化過程中,預測枝狀晶在流場效應下之成長型態。在成長模式中,本文根據KGT(Kurz-Giovanola-Trivedi)模型計算枝狀晶頂端之速度。本文以上述之模式模擬自由枝狀晶在流場效應下的凝固過程,觀察流場效應對枝狀晶頂端成長速度、溶質分布所造成的影響,並討論枝狀晶不同位置受到流場影響所產生之差異性。另外,本文選擇不同的優先成長角度和不同的流速去觀察不同枝狀晶成長型態間的異同,並利用枝狀晶頂端成長速度隨著時間的變化去分析金屬液流動對成長型態的影響。最後對於枝狀晶成長對流場的改變,本文亦作深入的探討。 |
英文摘要 | This research adopts the Modified cellular automaton (MCA) model to simulate the effects on dendritic microstructures during the Al-Cu alloy solidification. Based on the macro-model of heat transfer, microscopic nucleation, growth kinetics, and the liquid flow in the solute calculation are considered to predict the growth patterns of a dendrite. This research calculates the velocity of a dentritic tip using the KGT model. In the study, the tip growth velocity and solute distribution are observed to analyze the flow impact, and the differences between the observed locations of the dendrite are further discussed. In addition, the research has predetermined various growth angles and uniform velocities to study the similarities and dissimilarities between dentritic morphologies. Moreover, the study uses the profile of tip growth velocity vs. calculation time to evaluate the convection effect on the growth patterns. It has also brought a deeper discussion regarding the flow variations influenced by the dentritic growth. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。