查詢結果分析
相關文獻
- 柳杉結構用集成材曲梁之抗彎性質研究
- 結構用集成材柱梁結構以埋入式金屬連結件接合之彎矩抵抗性能評估
- Evaluation of the Structural Performance of Portal Frames Using Japanese Cedar Glulam
- Moment-resisting Performance of Residential Portal Frames Constructed with Self-tapping Screws
- 熱處理柳杉製材之抗彎性能評估
- 柳杉疏伐木製造之集成材抗彎性質評估
- Development of Roof Trusses with Metal Plate Connectors Using Domestic Plantation Timber
- 柳杉造林木釘接組合之屋頂木桁架載重性能評估
- 國產柳杉造林木開發結構用集成材之研究
- 柳杉造林木建造集成材拱橋之抗彎性能評估
頁籤選單縮合
題名 | 柳杉結構用集成材曲梁之抗彎性質研究=Flexural Properties of Curved Structural Glulam Beam Using Domestic Japanese Cedar Plantation Timber |
---|---|
作者姓名(中文) | 葉民權; 林玉麗; 江吉龍; | 書刊名 | 林產工業 |
卷期 | 27:2 2008.06[民97.06] |
頁次 | 頁97-107 |
分類號 | 436.187 |
關鍵詞 | 結構用集成材; 抗彎性質; 柳杉; 曲梁; Structural glulam; Static bending properties; Japanese cedar; Curved beam; |
語文 | 中文(Chinese) |
中文摘要 | 本研究以國產柳杉造林木開發彎曲結構用集成材,利用不同曲率及集成元厚度,配置成異等級結構用集成材,並探討曲梁之抗彎性能及在木結構設計應用的可行性。結果顯示柳杉材作為集成元並以彈性模數分等為1等材者佔87.5%,經目視分等後其等級大幅降低,其中等外材佔29.5%。集成元經配置組合可得CNS之E75-F240等級之異等級集成材,在曲率為π/3及π/4及集成元厚度為20及27 mm條件下,所組成之100×240×6000 mm曲梁其抗彎強度介於532~555 kgf/cm^2,抗彎彈性模數介於90.0~96.4×103 kgf/cm^2,破壞時所產生之水平剪斷應力平均為13.4 kgf/cm^2,半徑方向之應力平均為4.5 kgf/cm^2。所開發之彎曲集成材符合木結構設計規範之彎曲構材有關撓度及抗彎之性能需求。 |
英文摘要 | The curved structural glulam beams were developed using Japanese cedar plantation timber in this study. The flexural properties and feasibility on the structural design application were evaluated for the balanced structural glulam beams assembled with different curvature and lamina thickness. The results indicated that there were 87.5% of Japanese cedar laminae which could be rated as No. 1 grade based on modulus of elasticity. On the other hand, the lower grades were obtained as rated by visual grading rules resulting 29.5% of non-grade laminae products. A grade of E75-F240 balanced structural glulam could be obtained through laminae arrangement during the lamination process based on the approach as specified in the CNS standard. The flexural properties of 100×240×6000 mm curved beams fabricated with curvature of π/3 and π/4 and lamina thickness of 20 and 27 mm are described as follows: 532~555 kgf/cm^2 for static bending modulus of rupture, 90.0~6.4×103 kgf/cm^2 for modulus of elasticity, 13.4 kgf/cm^2 for average horizontal shear, and 4.5 kgf/cm^2 for average radial stress at rupture. The developed curved structural glulam beams can meet the requirement of deflection limitation and bending performance as specified in the building code for wood-framed structures. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。