查詢結果分析
相關文獻
- 在矽基板上高電阻係數之氧化鋅濕度感測材料之研製
- Performance Evaluation of In[feaf]O[feb0]-ZnO (IZO) Films Prepared by DC Pulsed Magnetron Sputtering
- 不同濺鍍條件對於氧化鋅薄膜特性之研究
- Characterizations and Applications of ZnO Thin Films
- 以射頻磁控式共濺鍍系統製作氧化鋅基薄膜電晶體之特性研究
- AZO薄膜濺鍍技術與應用
- 射頻磁控濺鍍成長摻雜鋁之氧化鋅薄膜特性分析
- 濺鍍操作條件對摻鋁氧化鋅透明導電膜特性之影響
- 飛秒脈衝雷射濺鍍技術與應用
- 應用氧化鋅鎵透明導電膜與反射式電極來改善GaN發光二極體光取出效率
頁籤選單縮合
題 名 | 在矽基板上高電阻係數之氧化鋅濕度感測材料之研製=Study of High Resistivity Zinc Oxide Humidity Sensing Material Grown on Silicon Wafer |
---|---|
作 者 | 楊誌欽; 李哲偉; 楊宏裕; 李依璇; 許宏嶸; | 書刊名 | 國立高雄海洋科大學報 |
卷 期 | 23 2009.02[民98.02] |
頁 次 | 頁121-130 |
分類號 | 448.5 |
關鍵詞 | 氧化鋅; 濺鍍; 矽製程; Zinc oxide; Sputter; Silicon fabrication; |
語 文 | 中文(Chinese) |
中文摘要 | 本研究利用濺鍍薄膜法在矽基板製程技術成長氧化鋅薄膜,研究中通入摻雜惰性氣體的氮氣,因為它不會和氧化鋅形成反應,若是在高溫中成長反而會去抑制氧原子的流失,若是未通入氮氣氣體所成長出氧化鋅薄膜,氧的缺陷會增加。所以,氧化鋅薄膜經由該技術成長之後,再經由快速熱退火處理,依據文獻資料顯示,將退火溫度設定在400℃退火時,若同時通入氮氣和氧氣氣體,氧氣會補足氧化鋅中氧原子的缺陷,氮氣也將減少氧化鋅薄膜中氧原子的損耗,所以,氧化鋅薄膜退火後的特性比退火前的特性較佳。另外,藉由LCR量測儀的量測,發現氧化鋅薄膜確實能具有良好的濕度感測反應,雖然對於濕度的感測反應並不很明顯,但可以藉由氧化鋅薄膜表面面積的增加,以及製成奈米線或奈米柱,將會使濕度感測器的感測靈敏度提升,本研究也改變氧化鋅薄膜材料成長條件,使氧化鋅濕度感測靈敏度提升。 |
英文摘要 | In this study, we report epitaxial growth of zinc oxide thin films on silicon (111) substrates using silicon oxide buffer layers. ZnO thin films were deposited on silicon substrates using the reactive DC magnetron sputtering in this study. The sputter was used zinc element as target and the oxygen was flowed into chamber to grow ZnO thin film on silicon wafer. ZnO thin film is discussed in the influence of moisture and nitrogen doping ZnO compost. The nitrogen element interfuse into ZnO thin film by sputtering process, it can result the zinc oxide with changes of resistivity and capacitances after Rapid Thermal Annealing (RTA) process. ZnO thin film is added H2O on the thin film surface, it have some different for the measurement of the capacitances and resistances by the LCR Meter. The ZnO epitaxial layers would be successfully in applications of humidity sensor. |
本系統中英文摘要資訊取自各篇刊載內容。