查詢結果分析
來源資料
相關文獻
- Femtosecond High-Power Soliton Compression of a Self-Started APM Erbium-Doped Fiber Laser
- Using Large Effective Area Fiber and Inverse Dispersion Fiber in DWDM Dispersion Compensation Frame
- 溫度對單模光纖零色散波長之影響
- 單模光纖極化模態分散之量測與其在高速傳輸系統影響之評估
- 新一代的光纖非零色散單模光纖介紹
- 如何減少單模光纖的熔接損耗
- 光傳送網路技術之發展
- 非零色散位移光纖(G.655)光纜之應用與探討
- 臺北南區營業處饋線調度控制系統之通信系統規劃簡介
- Study on the Temperature Sensor of Fiber-Aluminum Pipe Using Phase Measurement
頁籤選單縮合
題名 | Femtosecond High-Power Soliton Compression of a Self-Started APM Erbium-Doped Fiber Laser=飛秒高功率光固子壓縮自啟式加波鎖模掺鉺光纖雷射 |
---|---|
作者 | 林螢聰; | 書刊名 | 光學工程 |
卷期 | 97 2007.03[民96.03] |
頁次 | 頁31-41 |
分類號 | 336.9 |
關鍵詞 | 光固子效應壓縮; 掺鉺光纖放大器; 掺鉺光纖雷射; 單模光纖; 大有效面積光纖; Soliton-effect compression; Erbium-doped fiber amplifier; Erbium-doped fiber laser; Single-mode fiber; Large-effective-area fiber; |
語文 | 英文(English) |
中文摘要 | 本論文,是利用非線性光學中的光固子效應壓縮飛秒光纖雷射產生一個壓縮脈衝光。然而,利用光固子壓縮會造成脈衝品質的劣化,劣化的程度與光固子階數成正比;為了去改善光固子壓縮的缺點,我們提出了利用大模面積的高濃度?鉺光纖來製作?鉺光纖放大器,除了進一步縮短?鉺光纖的長度之外,更使得脈衝在放放大過程中,所產生的非線性效應能夠達到最小化。而在脈衝被放大之前,我們利用單模光纖事先引入適當的負啾頻量,目的是要預先補償在放大的過程中所引入的正啾頻題,使脈衝在放大的過程中能夠連續地窄化。這樣的架構能夠降低光固子壓縮的階數與抑制底座的產生。另外,在放大之後,我們選擇一段最佳的單模光纖長度,擷取出在光固子效應下最窄的脈衝。利用這種設計可以獲得一個波形完整乾淨的壓縮脈衝,脈衝寬度為56飛秒,放大壓縮後的峰值功率為46千瓦。最後,為了更進一步縮短脈衝寬度,獲得更大的壓縮率,我們將單模光纖與大有效面積光纖結合成二階式的光固子壓縮,其脈衝寬度可由原始的300飛秒壓縮到30妙,而脈衝的峰值功率也得以有700倍以上的放大。 |
英文摘要 | Femtosecond soliton effect compression is investigated to obtain pulses from passively mode-locked fiber laser. Due to the inherent drawback of soliton-effect compression that the pulse quality Qc (defined as the energy ratio of the central pulse to total pulse) is decreasing monotonically from its ideal value of 1 as the soliton order N increases, we propose a new concept of using a simplified Erbium-doped fiber Amplifier (EDFA) based all-fiber compressor. A very short but highly –doped large-mode-filed-area (LMFA) Er-doped fiber is employed to minimize the nonlinear process occurred during the high-chirped single-mode fiber (SMF) segment for controlling the chirp of fiber laser pulse before launching into the Er-doped fiber and the last compression stage. Optimized pre-chirping, amplification and compression of the fiber laser pulse can be achieved under the fine adjustment on both the lengths of the SMF segments before and after the LMFA-EDFA. We primarily report that a 100% energy confinement within the central portion of the compressed soliton pulse is obtained, which exists a peak power of 46 kW and a pulsewidth of 56fs. A additional compression stage is employed to further shorten the amplified EDFL pulsewidth and to achieve largest compression ratio, which combines the SMF and large-effective-area fiber (LEAF) to perform a dual-stage soliton compression link. As a result the pulsewidth shrinks from 300 fs to 30fs associated with a maximum peak-power amplification ration f >700. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。